how does the "SD MAP Sensor VE and Calibration" table work?
#31
Evolving Member
Thread Starter
Join Date: Mar 2008
Location: The mitten
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
#32
Former Sponsor
iTrader: (31)
use this and set it for 4bar.. stop using 3d.. i cant talk sorry i have a lot of work to do.
http://api.viglink.com/api/click?for...13340672037611
http://api.viglink.com/api/click?for...13340672037611
#35
Evolving Member
Thread Starter
Join Date: Mar 2008
Location: The mitten
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
#36
Former Sponsor
iTrader: (31)
start yourself at 1:1 ratio and adjust accordingly. do not use that timing map again though please.. just use what comes with the rom you downloaded from that link i posted!
as far as 3d goes.. i never did it myself just saying what i read from others.. bugs or not, it doesn't do anything that 2d cant do imo.
#37
Evolving Member
iTrader: (3)
Jitter issues seems hit or miss, My car never got them as with a few people. That being said there might have been a Table with the wrong address or a Scaling issue. This confliction would be hard to spot unless you search the code or examine each table in ECUflash.
But i am happy with my SD mod, car does run alot better IMO.
#41
Evolved Member
iTrader: (4)
I cant say that i'm not doing something wrong.........but what?
I know ive got the scaling factor set to 2.0 and it still does this nonsence!
as you can see better here....
https://www.evolutionm.net/forums/at...loadissue2.jpg
even if the correction factor was stock (1.2) it wouldn't reset until 306%
attached is screenshot of the table just so you can see the axis.
would you be willing to look over the tune file just to see if i am missing something here??
I know ive got the scaling factor set to 2.0 and it still does this nonsence!
as you can see better here....
https://www.evolutionm.net/forums/at...loadissue2.jpg
even if the correction factor was stock (1.2) it wouldn't reset until 306%
attached is screenshot of the table just so you can see the axis.
would you be willing to look over the tune file just to see if i am missing something here??
#42
Evolved Member
96531706 - can i use this sd rom on a jdm evo 7 ? 9055 has some different tables..
I have flashed the 9653 MAF version and worked around to remove the bugs, the driveability is better than 9417 [ just my opinion ] .
Confused between 2d and 3d ve tables.
Do i still need to tweak the MAF tables when running SD to correct fueling and jitters?
I have flashed the 9653 MAF version and worked around to remove the bugs, the driveability is better than 9417 [ just my opinion ] .
Confused between 2d and 3d ve tables.
Do i still need to tweak the MAF tables when running SD to correct fueling and jitters?
Thread
Thread Starter
Forum
Replies
Last Post
scheides
ECU Flash
357
Oct 22, 2021 08:59 AM