help with periphery configuration
#1
Newbie
Thread Starter
iTrader: (6)
Join Date: Jan 2008
Location: new jersey
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
help with periphery configuration
ok so i added the periphery configuration to the base xml file and i opened ecuflash and loaded my rom but still cant edit out the immobilizer
here is what i get
i spent hours searching this and got this far but now im stuck
here is what i get
i spent hours searching this and got this far but now im stuck
#2
this is what you need in your XML...
cheers
Code:
<table name="ECU Periphery00 (F9A) Bits" category="Periphery" address="f9a" type="2D" scaling="blobbits"> <table name="Periphery Bit Number" type="Static Y Axis" flipy="true" elements="16"> <data>bit.15: -</data> <data>bit.14: -</data> <data>bit.13: -</data> <data>bit.12: -</data> <data>bit.11: -</data> <data>bit.10: -</data> <data>bit.09: -</data> <data>bit.08: -</data> <data>bit.07: -</data> <data>bit.06: -</data> <data>bit.05: -</data> <data>bit.04: -</data> <data>bit.03: -</data> <data>bit.02: -</data> <data>bit.01: -</data> <data>bit.00: -</data> </table> </table> <table name="ECU Periphery0 (FAA) Bits" category="Periphery" address="faa" type="2D" scaling="blobbits"> <table name="Periphery Bit Number" type="Static Y Axis" flipy="true" elements="16"> <data>bit.15: -</data> <data>bit.14: Front o2 sensor heater circuit -</data> <data>bit.13: -</data> <data>bit.12: -</data> <data>bit.11: Enable EGR Duty = 100% when CTS Less Than 68C -</data> <data>bit.10: Timing knockdown on light acceleration and less than 3000rpm -</data> <data>bit.09: Enable Warmup Ign Retard -</data> <data>bit.08: -</data> <data>bit.07: Enable High Oct Ign Map Lookup (and many other subroutines) -</data> <data>bit.06: Enable Speed Limit Test -</data> <data>bit.05: -</data> <data>bit.04: Allow closed loop -</data> <data>bit.03: Enable immobilizer -</data> <data>bit.02: -</data> <data>bit.01: Rear o2 -</data> <data>bit.00: -</data> </table> </table> <table name="ECU Periphery1 (FBA) Bits" category="Periphery" address="fba" type="2D" scaling="blobbits"> <table name="Periphery Bit Number" type="Static Y Axis" flipy="true" elements="16"> <data>bit.15: -</data> <data>bit.14: -</data> <data>bit.13: -</data> <data>bit.12: -</data> <data>bit.11: -</data> <data>bit.10: -</data> <data>bit.09: -</data> <data>bit.08: -</data> <data>bit.07: -</data> <data>bit.06: -</data> <data>bit.05: 2nd thermo fan table -</data> <data>bit.04: -</data> <data>bit.03: -</data> <data>bit.02: -</data> <data>bit.01: -</data> <data>bit.00: Lean Spool -</data> </table> </table> <table name="ECU Periphery2 (FCA) Bits" category="Periphery" address="fca" type="2D" scaling="blobbits"> <table name="Periphery Bit Number" type="Static Y Axis" flipy="true" elements="16"> <data>bit.15: P0443, P0446, P0403, P0243, P0090, P2263 -</data> <data>bit.14: P0450, P0451, P0452, P0453 Evap -</data> <data>bit.13: P0441, P0442 Evap -</data> <data>bit.12: -</data> <data>bit.11: P0031, P0032, P0037, P0038 -</data> <data>bit.10: P1400 MAP Sensor -</data> <data>bit.09: P0401 EGR Test -</data> <data>bit.08: P0506, P0507 Idle Test -</data> <data>bit.07: P0170 (P0171, P0172) -</data> <data>bit.06: P0134 Front O2 -</data> <data>bit.05: P0300; set bit.4 and bit.5 to 0 to disable -</data> <data>bit.04: P0300; set bit.4 and bit.5 to 0 to disable -</data> <data>bit.03: P0132, P0136 O2 -</data> <data>bit.02: P0133, P0159 -</data> <data>bit.01: P0421 not in FSM -</data> <data>bit.00: -</data> </table> </table> <table name="ECU Periphery3 (FDA) Bits" category="Periphery" address="fda" type="2D" scaling="blobbits"> <table name="Periphery Bit Number" type="Static Y Axis" flipy="true" elements="16"> <data>bit.15: P0128 CT Below Reg -</data> <data>bit.14: P1603 Battery Backup -</data> <data>bit.13: -</data> <data>bit.12: -</data> <data>bit.11: P0180 - P0183, P0461, P2066 Fuel Sensors -</data> <data>bit.10: -</data> <data>bit.09: -</data> <data>bit.08: -</data> <data>bit.07: P0551 PS Pressure -</data> <data>bit.06: P0500 Speed Sens -</data> <data>bit.05: -</data> <data>bit.04: -</data> <data>bit.03: -</data> <data>bit.02: P0234, P0243, P2263 -</data> <data>bit.01: P0510 not in FSM -</data> <data>bit.00: P1715, P1750, etc -</data> </table> </table> <table name="ECU Periphery4 (FEA) Bits" category="Periphery" address="fea" type="2D" scaling="blobbits"> <table name="Periphery Bit Number" type="Static Y Axis" flipy="true" elements="16"> <data>bit.15: P0140 Rear O2 No Act -</data> <data>bit.14: P0069 MAP vs Baro -</data> <data>bit.13: P0111 IAT Circuit -</data> <data>bit.12: P0554 PS Press Sensor -</data> <data>bit.11: P1530 A/C1 Switch -</data> <data>bit.10: -</data> <data>bit.09: -</data> <data>bit.08: P0830 Clutch Pedal Circuit -</data> <data>bit.07: P0090 Fuel Pressure Circuit -</data> <data>bit.06: -</data> <data>bit.05: -</data> <data>bit.04: -</data> <data>bit.03: -</data> <data>bit.02: -</data> <data>bit.01: -</data> <data>bit.00: -</data> </table> </table> <table name="ECU Periphery00 Hex" category="Periphery" address="f9a" type="1D" scaling="Hex16"/> <table name="ECU Periphery0 Hex" category="Periphery" address="faa" type="1D" scaling="Hex16"/> <table name="ECU Periphery1 Hex" category="Periphery" address="fba" type="1D" scaling="Hex16"/> <table name="ECU Periphery2 Hex" category="Periphery" address="fca" type="1D" scaling="Hex16"/> <table name="ECU Periphery3 Hex" category="Periphery" address="fda" type="1D" scaling="Hex16"/> <table name="ECU Periphery4 Hex" category="Periphery" address="fea" type="1D" scaling="Hex16"/>
#3
Newbie
Thread Starter
iTrader: (6)
Join Date: Jan 2008
Location: new jersey
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
This is what I added to my XML is it not what I need?? I'm having a problem understanding how to change the values but something is preventing me from doing it.
http://evoecu.logic.net/wiki/Periphery_Configuration
http://evoecu.logic.net/wiki/Periphery_Configuration
#4
it doesnt look like your issue is the table definitions but the values. not sure why it says '(no match)'. i have never seen that before.
whats your ROM ID. mayeb someone can chime in and assist.
cheers
whats your ROM ID. mayeb someone can chime in and assist.
cheers
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
spdracr83
Project Cars / Build Threads
1
Jul 20, 2016 11:06 AM
spdracr83
Evo Engine / Turbo / Drivetrain
1
Jan 22, 2016 07:58 PM