Knock and extra timing tables USDM RA 53600010
#1
Evolved Member
Thread Starter
Knock and extra timing tables USDM RA 53600010
These are knock sensitivity tables and some extra timing tables that I didn't see in Goldens data base for the 53600010 USDM RA Rom. The scalings are the same as for other roms so I didn't put them here. Make sure you have the scalings in your xml if you are running the latest version of ecuflash so it doesn't crash when you open your map.
53600010:
53600010:
Code:
<table name="Knock Sensitivity Load Threshold" category="Knock Detection" address="561ec" type="2D" level="2" scaling="Load8"> <table name="RPM" address="61b48" type="Y Axis" elements="16" scaling="RPM"/> </table> <table name="Knock Background Noise Multiplier" category="Knock Detection" address="59df4" type="2D" level="2" scaling="uint8"> <table name="RPM" address="61b48" type="Y Axis" elements="16" scaling="RPM"/> </table> <table name="Knock Background Noise Adder (SINGLE GAIN) #1" category="Knock Detection" address="5fece" type="2D" level="2" scaling="uint8"> <table name="RPM" address="61b48" type="Y Axis" elements="16" scaling="RPM"/> </table> <table name="Knock Background Noise Adder (SINGLE GAIN) #2" category="Knock Detection" address="59dcc" type="2D" level="2" scaling="uint8"> <table name="RPM" address="61b48" type="Y Axis" elements="16" scaling="RPM"/> </table> <table name="Knock Background Noise Adder (TRIPLE GAIN) #1" category="Knock Detection" address="5feba" type="2D" level="2" scaling="uint8"> <table name="RPM" address="61b48" type="Y Axis" elements="16" scaling="RPM"/> </table> <table name="Knock Background Noise Adder (TRIPLE GAIN) #2" category="Knock Detection" address="59de0" type="2D" level="2" scaling="uint8"> <table name="RPM" address="61b48" type="Y Axis" elements="16" scaling="RPM"/> </table> <table name="EGR Timing Advance" category="Timing" address="57301" type="3D" swapxy="true" scaling="Timing"> <table name="Load" address="61580" type="X Axis" elements="9" scaling="Load"/> <table name="RPM" address="6175e" type="Y Axis" elements="10" scaling="RPM"/> </table> <table name="Percent Low Temp Timing Trim vs Coolant Temp" category="Timing" address="561bc" type="2D" scaling="Percent255"> <table name="Engine Temp" address="61140" type="Y Axis" elements="8" scaling="TempFarenheit"/> </table> <table name="Mivec Intake Interpolate X Over" category="Timing" address="5e366" type="2D" level="1" scaling="ISCVSteps"> <table name="X" address="626f0" type="Y Axis" elements="9" scaling="RPMPerMPH"/> </table> <table name="Mivec Exhaust Interpolate X Over" category="Timing" address="5e374" type="2D" level="1" scaling="ISCVSteps"> <table name="X" address="626f0" type="Y Axis" elements="9" scaling="RPMPerMPH"/> </table> <table name="Mivec % intake X over" category="Timing" address="5e392" type="2D" level="1" scaling="ISCVSteps"> <table name="X" address="6247c" type="Y Axis" elements="11" scaling="RPMPerMPH"/> </table> <table name="Mivec % exhaust X over" category="Timing" address="5e382" type="2D" level="1" scaling="ISCVSteps"> <table name="X" address="6247c" type="Y Axis" elements="11" scaling="RPMPerMPH"/> </table> <table name="IAT Ignition Advance Compensation" category="Timing" address="56184" type="2D" scaling="IgnitionCompensation"> <table name="IAT" address="61156" type="Y Axis" elements="7" scaling="TempFarenheit"/> </table>
#2
Evolved Member
Cool, thanks. I've just updated Golden's site.
...with all except for the four MIVEC "X Over" items - those don't currently have tables set up in the DB. I'll get to those later (if I remember, lol).
Rich
...with all except for the four MIVEC "X Over" items - those don't currently have tables set up in the DB. I'll get to those later (if I remember, lol).
Rich
Thread
Thread Starter
Forum
Replies
Last Post
AIK
Evo X Engine Management / Tuning Forums
10
Sep 13, 2010 02:48 PM