ECU Flash not reading ECU? (Newb question)
#1
Evolved Member
Thread Starter
iTrader: (11)
Join Date: May 2003
Location: Holding over the VOR
Posts: 1,263
Likes: 0
Received 5 Likes
on
4 Posts
ECU Flash not reading ECU? (Newb question)
Lads...
Just finally got a 1.3u.
Car is a 9MR that I'm way behind schedule on.
Silly questions first.
1. I'm supposed to connect the additional plug to the ACD thingy correct? So I have two connections to the car?
2. When I first tried to read the ROM, it gave me one of the more common errors related to low voltage. I ran the car, and read again. Now though... I'm getting "error sending kernel size".
Anyone have any advice on that? I didn't find anyone that actually solved the issue...
The car has a tune on it, so I'm quite positive that the ECU has connectivity.
Anyway... any help is appreciated.
Just finally got a 1.3u.
Car is a 9MR that I'm way behind schedule on.
Silly questions first.
1. I'm supposed to connect the additional plug to the ACD thingy correct? So I have two connections to the car?
2. When I first tried to read the ROM, it gave me one of the more common errors related to low voltage. I ran the car, and read again. Now though... I'm getting "error sending kernel size".
Anyone have any advice on that? I didn't find anyone that actually solved the issue...
The car has a tune on it, so I'm quite positive that the ECU has connectivity.
Anyway... any help is appreciated.
Last edited by ProPilot04; Jun 18, 2013 at 03:34 PM.
#2
Evolved Member
iTrader: (10)
down load ecu unlocker connect both plugs run unlocker then open ecuflash , hit read then select evo9 .eclipse then ok
unlocker in here
https://www.evolutionm.net/forums/ec...downloads.html
unlocker in here
https://www.evolutionm.net/forums/ec...downloads.html
#3
Evolved Member
Thread Starter
iTrader: (11)
Join Date: May 2003
Location: Holding over the VOR
Posts: 1,263
Likes: 0
Received 5 Likes
on
4 Posts
down load ecu unlocker connect both plugs run unlocker then open ecuflash , hit read then select evo9 .eclipse then ok
unlocker in here
https://www.evolutionm.net/forums/ec...downloads.html
unlocker in here
https://www.evolutionm.net/forums/ec...downloads.html
I just downloaded a new version of ECU flash (it's like 2 builds newer, same version though) and I'm going to try that.
I've heard some people say that I should try it with the car running? That seems like a bad idea though no?
#4
i was always told don't write to the ecu while the car is on, idk not an expert by any means but does not sound like a good idea, im having the same problem, i read my car and my buddies cars and 3 days ago, yesterday after i finished the patch and map it wouldn't connect, drove the car, let it warm up, charge up, nothing, it randomly connected to mine but not my friends and it wont read mine either now... just frustrated as hell now... all evo 9's same ecu ids. need help bad!!!!
#5
Evolved Member
Join Date: May 2011
Location: New Zealand
Posts: 964
Likes: 0
Received 0 Likes
on
0 Posts
I read my ECU with my car running. It just turns off and starts the read, I think it has something to do with the voltage reading being higher.
As for writing the ECU with the car running? I imagine the same thing would happen but I haven't tried so I don't actually know.
As for writing the ECU with the car running? I imagine the same thing would happen but I haven't tried so I don't actually know.
Thread
Thread Starter
Forum
Replies
Last Post
rawkus123
09+ Ralliart Engine/Turbo/Drivetrain
3
Jul 20, 2017 05:19 AM