TephraXMOD V2
#526
#529
Thread Starter
EvoM Guru
iTrader: (6)
Joined: Feb 2007
Posts: 9,486
Likes: 66
From: Melbourne, Australia
no.
two reasons:
a) i dont want to make too many unnecessary changes, especially ones that would radically change the "Stock" feel to a map (ie the injector rescaling is going to be user done, not from my factory )
b) its easy for people todo it based on forums posts and howto's already, so its not like its special/hard
quick update - the canbus testing worked, but caused some unexpected issues with ecuflash AND evoscan, so im just making some ammendments... shouldn't be too long now!
two reasons:
a) i dont want to make too many unnecessary changes, especially ones that would radically change the "Stock" feel to a map (ie the injector rescaling is going to be user done, not from my factory )
b) its easy for people todo it based on forums posts and howto's already, so its not like its special/hard
quick update - the canbus testing worked, but caused some unexpected issues with ecuflash AND evoscan, so im just making some ammendments... shouldn't be too long now!
#531
no.
two reasons:
a) i dont want to make too many unnecessary changes, especially ones that would radically change the "Stock" feel to a map (ie the injector rescaling is going to be user done, not from my factory )
b) its easy for people todo it based on forums posts and howto's already, so its not like its special/hard
quick update - the canbus testing worked, but caused some unexpected issues with ecuflash AND evoscan, so im just making some ammendments... shouldn't be too long now!
two reasons:
a) i dont want to make too many unnecessary changes, especially ones that would radically change the "Stock" feel to a map (ie the injector rescaling is going to be user done, not from my factory )
b) its easy for people todo it based on forums posts and howto's already, so its not like its special/hard
quick update - the canbus testing worked, but caused some unexpected issues with ecuflash AND evoscan, so im just making some ammendments... shouldn't be too long now!
#532
using a microchip canbus analyzer, i was never able to get clean data. either ETACS is acting like a gateway and booting me off or data too much for the device to handle.
lookin for CANBUS baud rate.
CAN Identifier, typically 11 or the extended 29 bit format.
and if evo is data is prioritized with MSB (Most Significant Bit) or LSB (Least Significant Bit) format.
#540