How to add 2 step/ launch control
#1
Newbie
Thread Starter
Join Date: Feb 2014
Location: Ulysses,KS
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
How to add 2 step/ launch control
Hi i am knew to the tunning world I have a 03 Lancer Evolution and I am trying to add 2 stepp.. I have tatrix cable 1.3u evoscan and ecuflash.. The car was previously professionaly dyno tuned for the current mods just intake and exhaust... Can someone point me in the right direction
#2
EvoM Guru
iTrader: (1)
the car has a stationary rev limiter stock, it should be under the "limits" drop down. For launch maps, you need to implement a tephra v7 rom
#4
EvoM Guru
iTrader: (1)
#5
That thread is 214 pages! I've read around 24 starting at pg 1, but there is just soooooo much information. Is there anyway to "clean" up the thread to get just the pertinent information, such as questions and answers about problems?
#7
Newbie
Thread Starter
Join Date: Feb 2014
Location: Ulysses,KS
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
finaly got it down i couldnt find the xml file for my evo i did the tephra mod its realy simple and it finaly worked... i set my launch at 5k but it bogs can someone help me out to get the launch down
Trending Topics
#12
EvoM Guru
iTrader: (1)
5200 rpm limiter. turn on launch maps, and in the launch map tables from 4750rpm up, enrich fuel 15-20% in all load cells, and then in the 4750-5500rpm/120-180 load cells (I think) pull 4-5 degrees of timing. should build about 15psi of boost. This will give you more fuel so after you launch the car, it will stay rich and prevent knock while the car is coming off the launch map (it doesn't instantly/seamlessly go back to the regular maps), but timing will only be retarded in load range the ECU sees when on the launch limiter.
Feed the clutch and hold on...
Feed the clutch and hold on...
Thread
Thread Starter
Forum
Replies
Last Post