Fuel trim low stuck but mid works...
#1
Thread Starter
Newbie
iTrader: (3)
Joined: Nov 2011
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
From: USA
Fuel trim low stuck but mid works...
Hey guys. I've never had a problem logging trims but they've all been on 8's. Now this 9 is logging fuel trim mid and cycling at idle. Im sure mid is for cruise. Fuel trim low never moves from zero. Front o2 voltage is usually pegged at 0.9 as well so could this possibly be a broken front o2? Or does the ix log trims differently from the viii?
#3
Thread Starter
Newbie
iTrader: (3)
Joined: Nov 2011
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
From: USA
I'm logging with evoscan 2.9. The car is tuned by a shop. I just find it weird fuel trim mid is cycling at idle? I haven't messed with the request id's in evoscan...
Could be a custom ROM I suppose. Should I transfer all values over to one of tephras SD patched ROMs?
Could be a custom ROM I suppose. Should I transfer all values over to one of tephras SD patched ROMs?
#5
Evolving Member
It's probably because your car is drawing more vacuum at idle than your low to mid cutoff so it's idling with the mid (cruise) closed loop setup. Look for a Closed Loop - LT Trim Control table or something similarly named. That's what it's called in Tephra. Check the max airflow (hz) you log at idle and adjust the values accordingly.
Thread
Thread Starter
Forum
Replies
Last Post
AutoMotoSports
Automotosports - Illinois
25
Apr 28, 2008 03:49 PM