Flex Fuel testing in TephraXMOD V3
#46
Evolving Member
iTrader: (1)
So essentially, the FlexConverter wires in between the fuel tank pressure sensor on the car and the ethanol content sensor?
This is pretty awesome. I am going to work with a local shop once this gets hammered out (Evolution Dynamics) to go this route. Goodbye accessport!
This is pretty awesome. I am going to work with a local shop once this gets hammered out (Evolution Dynamics) to go this route. Goodbye accessport!
Last edited by rico05; Oct 7, 2015 at 05:20 PM.
#49
#56
I had the same setup on a 100$ android tablet I picked up. What kind of PID/s rates are you getting? I was able to get roughly 130 PID/s using a cable, but it was very inconsistent/unreliable. Switching to one of the nicer BT units helped out, but it'll always have that little bit of 'lag', which kills the whole experience for me. Also, what are your minimum/maximum values you have set for everything? Defaults?
This is a screenshot of the application Torque. You can get similar applications for iPhone, however you have to use a wifi OBDII adapter, as bluetooth/wired is unavailable for iPhones due to reasons I don't have time to get into (at work). It's unrelated to Tephramod entirely.
This is a screenshot of the application Torque. You can get similar applications for iPhone, however you have to use a wifi OBDII adapter, as bluetooth/wired is unavailable for iPhones due to reasons I don't have time to get into (at work). It's unrelated to Tephramod entirely.
#60
Evolving Member
Join Date: Feb 2008
Location: Ottawa Canada
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts