ECUFlash Issue
#1
Thread Starter
Evolved Member
iTrader: (2)
ECUFlash Issue
Today I started having an issue with ECUFlash where it freezes up when I try to read the file off of my ECU. I tried multiple times with the same result. It doesn't freeze at the same point each time either. Sometimes at 5% read, sometimes at as much as 90% read but I couldn't get it to pull the file.
I tried a different ECU and the same thing happens. For the hell of it I tried to flash a different ROM onto the ECU and it hung. I then made a small change to the original ROM and flashed it and it worked but I still cannot read the ROM back off of the ECU.
Evoscan datalogs fine and the car starts fine without any error codes.
The car has been parked for sometime so I don't know if the car is the issue. The only other thing is that the computer was changed from Windows 7 to Windows 10 recently. I have tried compatibility mode to correct any issues here but that hasn't changed anything. Also re-installed ECUFlash.
I am using a Tactrix 2.0 and ECUFlash 143.30. It was a beta but i have been using it for literally 4 years or so without any issues. I am wondering if I should install the latest version of ECUFlash.
Let me know if anyone has any insight.
Thanks.
I tried a different ECU and the same thing happens. For the hell of it I tried to flash a different ROM onto the ECU and it hung. I then made a small change to the original ROM and flashed it and it worked but I still cannot read the ROM back off of the ECU.
Evoscan datalogs fine and the car starts fine without any error codes.
The car has been parked for sometime so I don't know if the car is the issue. The only other thing is that the computer was changed from Windows 7 to Windows 10 recently. I have tried compatibility mode to correct any issues here but that hasn't changed anything. Also re-installed ECUFlash.
I am using a Tactrix 2.0 and ECUFlash 143.30. It was a beta but i have been using it for literally 4 years or so without any issues. I am wondering if I should install the latest version of ECUFlash.
Let me know if anyone has any insight.
Thanks.
#7
Thread Starter
Evolved Member
iTrader: (2)
I doubt you're locked out but you can give EcuUnlocker a shot.
Just leave it open with ecuflash
https://www.aktivematrix.com/blog/ak...ix-useful-info
Just leave it open with ecuflash
https://www.aktivematrix.com/blog/ak...ix-useful-info
I suspect it is a compatibility issue with Windows X. Have downloaded 1.44 but haven't gotten to try it yet.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
goBYeBYe
Evo General
3
Oct 7, 2007 08:58 AM