96534706 - 2150 - Idle issue
#1
Evolved Member
Thread Starter
96534706 - 2150 - Idle issue
Hi guys ..
Just started to tune 2150s + Omni 4 bar on pump gas . They dont fire on 96534706 with out pressing the paddle . Running open loop. at idle. I tried different latencies and scalings but they wont fire on the key. Min ipw used - 1.072 , 1.104 , 1.112 .
Any one faced the same scenario ?
Just started to tune 2150s + Omni 4 bar on pump gas . They dont fire on 96534706 with out pressing the paddle . Running open loop. at idle. I tried different latencies and scalings but they wont fire on the key. Min ipw used - 1.072 , 1.104 , 1.112 .
Any one faced the same scenario ?
#6
Evolved Member
Thread Starter
Its quite odd that 1.104 works well on 90556701 + JB latencies.
Switched to 9653 and it never idled. What are your MAP VE values in idle areas ?
Trending Topics
#9
Evolved Member
Thread Starter
Lower them using formula -- stock value [ old scaling / new scaling ] ...
Do i need to lower the VE values in Idle areas as well ?
Scaling and ipw have inverse relationship ?
#11
Evolved Member
Thread Starter
Update -
In case if some one is going through this problem [ pump gas ].
John Bradley's Latencies are spot on.
Lowering Cranking IPW helped.
Increasing MAF comp vs coolant values in lower temps.
Adjusted the BISS.
Car fires up right away on key with out pressing the throttle.
Thanks everyone for the help.
In case if some one is going through this problem [ pump gas ].
John Bradley's Latencies are spot on.
Lowering Cranking IPW helped.
Increasing MAF comp vs coolant values in lower temps.
Adjusted the BISS.
Car fires up right away on key with out pressing the throttle.
Thanks everyone for the help.
Thread
Thread Starter
Forum
Replies
Last Post
EmeryatSTM
Vendor Announcements
18
Mar 14, 2010 11:52 PM
Toxin
Evo Engine / Turbo / Drivetrain
15
Mar 14, 2009 12:47 PM
shanezt
For Sale/WTB - Engine / Drivetrain / Power
28
May 2, 2008 08:30 AM