Another Stock Turbo over 300hp on STM's Mustang Dyno
Jul 28, 2009, 10:12 AM
#22
She was tuned by CBRD before the cams(and their dyno read ~30WHP higher than STM's), however STM also fixed a few Boost leaks along with the cams, so I'm not sure how much of the 50WHP gain was from the new throttle body seal and lower injector seals and how much was from the cams themselves. I would guess about 30WHP from the cams and 20WHP from the boost leaks and the tune itself.
Last edited by nick_622; Jul 28, 2009 at 10:22 AM.
Jul 29, 2009, 03:32 PM
#24
car looked familiar 
what were the temps?
curious in the dyno disparity...
the chart i have is 302whp/289wtq at 23.8 psi in 60 degree temps 30% humidity! if it was in the 80's and higher or similar humidity, i would expect the 20whp difference and about 10wtq!!
cheers
cb
what were the temps?
curious in the dyno disparity...
the chart i have is 302whp/289wtq at 23.8 psi in 60 degree temps 30% humidity! if it was in the 80's and higher or similar humidity, i would expect the 20whp difference and about 10wtq!!
cheers
cb
Last edited by CBRD; Jul 29, 2009 at 03:37 PM.
Jul 29, 2009, 04:50 PM
#29
Evolving Member
iTrader: (6)
Join Date: Mar 2009
Location: connecticut
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
Nice #'s i did 315hp and 289tq on a mustang dyno w/ stock turbo ix w/ 3"tbe samco intake mbc ets 3.5 intercooler kit and 255 pump. just ordered 272 cams to. Hopefully after the cams i'm at rthe same power as you. Good luck.
