Highest HP 4g63 engine (from 2007)
#1306
#1308
Evolved Member
iTrader: (32)
We had 840hp (680whp) from a stock frame 62mm 11blade design to a 12,5cr engine using VP import.
As comparison from an fpblack we had 540whp stock fuel and 580whp with race fuel at 38psi to a stage 1 engine 11,2cr 2ltr. There was the limit of the black to our dyno.
As i write to previous post we use from above this garrett ATP turbine housing.
As comparison from an fpblack we had 540whp stock fuel and 580whp with race fuel at 38psi to a stage 1 engine 11,2cr 2ltr. There was the limit of the black to our dyno.
As i write to previous post we use from above this garrett ATP turbine housing.
If you're going to build a performing stock appearing turbo that makes huge power, you need make a much larger turbine housing. Requirement #1. I know I've seen myself do it.
#1309
Engine hp and they don't break at that.
You can be the first one to find the limit.
This one is still alive but we are only at 975 so far.
This is a sleeved block but a stock crank so maybe we will find out where the cranks limit goes.
The VAG coils started misfiring around 900hp so we will change to MSD.
Erland
Last edited by Erland Cox; Jan 25, 2012 at 06:46 PM.
#1312
VAG coil on plug coils from Audi and VW are cheap and very good coils.
VAG is Volkswagen Audi Group I believe.
They are used by many and on 500cc per cylinder they should be able to handle the cylinder pressure from 300hp/ cylinder.
But with methanol better coils are needed.
Erland
VAG is Volkswagen Audi Group I believe.
They are used by many and on 500cc per cylinder they should be able to handle the cylinder pressure from 300hp/ cylinder.
But with methanol better coils are needed.
Erland
Last edited by Erland Cox; Jan 25, 2012 at 06:54 PM.
#1314
Evolved Member
iTrader: (18)
Join Date: Oct 2008
Location: Albany NY
Posts: 1,109
Likes: 0
Received 0 Likes
on
0 Posts
ER did 750whp (Dynojet) on an FP Black. Just saying. The ATP turbine housing is horrid... I would prefer a heavily ported stock housing.
If you're going to build a performing stock appearing turbo that makes huge power, you need make a much larger turbine housing. Requirement #1. I know I've seen myself do it.
If you're going to build a performing stock appearing turbo that makes huge power, you need make a much larger turbine housing. Requirement #1. I know I've seen myself do it.
#1316