♥ IVEYTUNE FTW ♥ BabiDollEvo8 puts down 473awhp/395awtq on pump93 @ 29psi - NO ALKY!!
#18
SlickMotorSports GT30R Kit
- Exedy Twin Plate HD Clutch
- Precision 1000cc Injectors
- HKS F-Con V-Pro *IveyTune*
- HKS F-Con Navigator
- HKS Twin Power DLi
- HKS 280 In/Ex Cams
- HKS Cam Gears
- HKS Timing Belt
- HKS Fuel Rail
- HKS 30th Anniversary TBE
- Perrin CAT Delete Pipe
- TiAL 50mm BOV
- TiAL 38mm Wastegate
- AMS Upper Intercooler Pipe
- Agency Power Front & Side Motor Mounts
- TurboXS FMIC
- Koyo Radiator
- ARP Head Studs
- Aeromotive Fuel Pressure Regulator
- Walbro 255 Fuel Pump
- Ralliart Spark Plug Wires
- Spal Fan
- Cusco Front Strut Brace w/ Brake Boost Stop
- Mini Battery & AMS Battery Tray
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i have like this setup on my car with HKS 2.3 engine and heads ,HKS F-Con V-Pro , HKS gt3037s but the question is .. can i get like this number on pump gas (21-24 psi )
- Exedy Twin Plate HD Clutch
- Precision 1000cc Injectors
- HKS F-Con V-Pro *IveyTune*
- HKS F-Con Navigator
- HKS Twin Power DLi
- HKS 280 In/Ex Cams
- HKS Cam Gears
- HKS Timing Belt
- HKS Fuel Rail
- HKS 30th Anniversary TBE
- Perrin CAT Delete Pipe
- TiAL 50mm BOV
- TiAL 38mm Wastegate
- AMS Upper Intercooler Pipe
- Agency Power Front & Side Motor Mounts
- TurboXS FMIC
- Koyo Radiator
- ARP Head Studs
- Aeromotive Fuel Pressure Regulator
- Walbro 255 Fuel Pump
- Ralliart Spark Plug Wires
- Spal Fan
- Cusco Front Strut Brace w/ Brake Boost Stop
- Mini Battery & AMS Battery Tray
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i have like this setup on my car with HKS 2.3 engine and heads ,HKS F-Con V-Pro , HKS gt3037s but the question is .. can i get like this number on pump gas (21-24 psi )
#19
Good Luck
#21
Help me out here - what's the 29psi pump tune for? Just an not-so-safe pull you had? If the 25psi pump tune is for DD....
#25
oh, and boomn29... nice volks! i have my fenders cut/welded so there's no lip and my next buy will be wider wheels, 18x9.5 with 255/35 tires... but what offset did you get your wheels in?
#27
I picked up 18x9.5" +28's. They have some old 275/35-18's Hoosiers mounted on them. I can safely say they'll never fit in the rear w/o a LOT of fender pulling. There's a decent amount of room for a higher offset in the rear though, so I'm looking for another set of like +34/35. Hopefully I can run my 245's Hoosiers on these since they're about 1" thinner.
#29
Thx - at least somebody follows my nonsense! I think a 255/35 would be very tasty on an 18x9.5" --> well chosen!
I picked up 18x9.5" +28's. They have some old 275/35-18's Hoosiers mounted on them. I can safely say they'll never fit in the rear w/o a LOT of fender pulling. There's a decent amount of room for a higher offset in the rear though, so I'm looking for another set of like +34/35. Hopefully I can run my 245's Hoosiers on these since they're about 1" thinner.
I picked up 18x9.5" +28's. They have some old 275/35-18's Hoosiers mounted on them. I can safely say they'll never fit in the rear w/o a LOT of fender pulling. There's a decent amount of room for a higher offset in the rear though, so I'm looking for another set of like +34/35. Hopefully I can run my 245's Hoosiers on these since they're about 1" thinner.