forced fed performance 6262
#1
Account Disabled
Thread Starter
Join Date: Aug 2010
Location: with idiots
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
forced fed performance 6262
Just got retuned by bobby at Forced fed performance aka (crewdawg) it was a hot day but we manged to put down 499 safely on 31 psi peak not bad for being 98degress on the dyno Also note this mustang dyno reads like low like buschur's and stm's dyno..I wanna say thanks to bobby for the great tune and cam install and the rest of the epic and forced fed crew for all the help.
Mods:
Turbo trix 6262 turbo kit with 63.housing for faster spooling
Buschur tbe
Custom ets intake with 9 inch cone with maf
Ets 3.5 intercooler
Custom intercooler piping 2.5 inch
Act 6 puck clutch
Street flywheel
1,000 cc injectors
255 walbro pump
Gsc 2 274 cams
Hallman b.c
Tial vta bov 50mm
And tephra v7 map with bobbys tune with custom low tq.
Sorry for the low ink on the dyno sheet.
Mods:
Turbo trix 6262 turbo kit with 63.housing for faster spooling
Buschur tbe
Custom ets intake with 9 inch cone with maf
Ets 3.5 intercooler
Custom intercooler piping 2.5 inch
Act 6 puck clutch
Street flywheel
1,000 cc injectors
255 walbro pump
Gsc 2 274 cams
Hallman b.c
Tial vta bov 50mm
And tephra v7 map with bobbys tune with custom low tq.
Sorry for the low ink on the dyno sheet.
Last edited by 4doorstreetbike; Aug 6, 2010 at 07:15 PM.
#3
Account Disabled
Thread Starter
Join Date: Aug 2010
Location: with idiots
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
#4
Evolving Member
iTrader: (17)
Join Date: Jul 2009
Location: SC
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
I hope under 30psi, since its interal it creeps and falls off. So if I can hold 28 steady I feel I can get that, but if she hits 30 on pump with no knock then thats fine too. Just pray the stock block can handle it for awhile
#5
Account Disabled
Thread Starter
Join Date: Aug 2010
Location: with idiots
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
If you hit 460 on their dyno on 30 psi that would be great that's like 530 whp dynjet number maybe you can hit that in the fall its way to hot now..We had to back it down to 500 whp if We would have added 1 more psi and some timing and reved up a bit more it would have hit 525 but still on the stock block..