540hp FP Black Stock Motor
#32
Evolving Member
iTrader: (1)
Join Date: Jan 2007
Location: cali
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
I was not aware of the danger will robinson robot unfortunately, good one..
I will be as friendly as possible and answer your questions as it looks like you may not know as much about data plots and how to spot graphs that read artificially high..
1. Is that a question or statement?
2. No, thanks for the compliment.
2.5 No, but thanks for your input.
3. I test ethanol content in the lab where I work, I am guessing you don't know how E85 mixtures with gasoline change during the course of the year..
If anyone else has concerns of of these numbers please feel free to ask. I am VERY familliar with many different types of mustang dynos as well as the various software versions and I know how to actually spot artificially high numbers on a graph, and this is not one of them. Lets just leave it at that and carry on like grown ups..Anyone that knows anything about how dynos work will also be able to see this. I welcome any vendor in here to debate the graph in regards to the numbers being spat out by this dyno, I am NOT one of those people..
I will be as friendly as possible and answer your questions as it looks like you may not know as much about data plots and how to spot graphs that read artificially high..
1. Is that a question or statement?
2. No, thanks for the compliment.
2.5 No, but thanks for your input.
3. I test ethanol content in the lab where I work, I am guessing you don't know how E85 mixtures with gasoline change during the course of the year..
If anyone else has concerns of of these numbers please feel free to ask. I am VERY familliar with many different types of mustang dynos as well as the various software versions and I know how to actually spot artificially high numbers on a graph, and this is not one of them. Lets just leave it at that and carry on like grown ups..Anyone that knows anything about how dynos work will also be able to see this. I welcome any vendor in here to debate the graph in regards to the numbers being spat out by this dyno, I am NOT one of those people..
So I've never seen data from your shop before and the numbers you appear to be alarming. Hence the robot comment which you obviously underatand.
I'm trying to rank your dyno on the scale in my head and again I said it "did not compute" LOLz
The only cars here making this kinda of power are built motor cars running really high boost 40+ and they are getting those numbers on Dynojet dynos.
I was going to post exapmples but though that would detract from your thread too much.
Are there any comparison threads where cars have been on your dyno and someone elses?
As for knowning E85 Yes I know E85 fine I've been on it over year. Here in Cali (land of sunshie) though we don't have the winter stuff so never mnd my comment about that, slipped my mind as all ops:
I'll pm you for more info
#33
Former Sponsor
Thread Starter
iTrader: (1)
Join Date: Sep 2009
Location: Philly, Jersey
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Hi Petey, thaks for responding.
So I've never seen data from your shop before and the numbers you appear to be alarming. Hence the robot comment which you obviously underatand.
I'm trying to rank your dyno on the scale in my head and again I said it "did not compute" LOLz
The only cars here making this kinda of power are built motor cars running really high boost 40+ and they are getting those numbers on Dynojet dynos.
I was going to post exapmples but though that would detract from your thread too much.
Are there any comparison threads where cars have been on your dyno and someone elses?
As for knowning E85 Yes I know E85 fine I've been on it over year. Here in Cali (land of sunshie) though we don't have the winter stuff so never mnd my comment about that, slipped my mind as all ops:
I'll pm you for more info
So I've never seen data from your shop before and the numbers you appear to be alarming. Hence the robot comment which you obviously underatand.
I'm trying to rank your dyno on the scale in my head and again I said it "did not compute" LOLz
The only cars here making this kinda of power are built motor cars running really high boost 40+ and they are getting those numbers on Dynojet dynos.
I was going to post exapmples but though that would detract from your thread too much.
Are there any comparison threads where cars have been on your dyno and someone elses?
As for knowning E85 Yes I know E85 fine I've been on it over year. Here in Cali (land of sunshie) though we don't have the winter stuff so never mnd my comment about that, slipped my mind as all ops:
I'll pm you for more info
#36
Evolved Member
iTrader: (2)
Thought I would share our 3rd gear 38psi pull when we first dyno'd the FP-Black turbo. It has tremendous capabilities. Later boost tests at 40+ showed similar results. Peak boost at 38.2 and dropping only to 34.73 by 8500. 5900 to 8500 with boost variance of 37.4 to 38.2 to 34.73psi.
#39
Evolved Member
iTrader: (8)
I like the method, I would do similar if trying to keep a stock block in one piece on a large turbo.
I never got the mentality of turning the boost way up then using lower timing to keep the stock block in one piece. That is just a waste and that high boost will just add more heat to everything in the process, along with the low timing cooking everything.
Personally, I'd rather just use boost to regulate torque and run at optimum AFR and timing for that boost level.
I also think this is a great way to setup something where you want a flat torque curve to make the car more predictable, like in road racing.
The only caveat to this is that with the constant climbing HP curve, it naturally makes the driver want to hold the gear for longer and higher into the RPM range, which can be just as detrimental to the stock motor. This method takes some disciple on setting reasonable rev limits and not letting the top end HP get the best of you by setting too aggressive rev limiters.
You can also take this one step further with boost by gear, allowing you to limit torque at the wheels to basically match the type of traction circle you'll see at that speed in each gear.
I never got the mentality of turning the boost way up then using lower timing to keep the stock block in one piece. That is just a waste and that high boost will just add more heat to everything in the process, along with the low timing cooking everything.
Personally, I'd rather just use boost to regulate torque and run at optimum AFR and timing for that boost level.
I also think this is a great way to setup something where you want a flat torque curve to make the car more predictable, like in road racing.
The only caveat to this is that with the constant climbing HP curve, it naturally makes the driver want to hold the gear for longer and higher into the RPM range, which can be just as detrimental to the stock motor. This method takes some disciple on setting reasonable rev limits and not letting the top end HP get the best of you by setting too aggressive rev limiters.
You can also take this one step further with boost by gear, allowing you to limit torque at the wheels to basically match the type of traction circle you'll see at that speed in each gear.
Last edited by 03whitegsr; Oct 23, 2010 at 04:03 PM.
#41
Aaron and I have both discussed using a boost curve like this on here a few times. I an going to do this with my car whenever I get my 6262R on. I didnt want to use a bolt on turbo since I was unsure that the internal gate would be able to do a boost cirve like that. I just recently traded my greddy profec for and AVC-R to do the rpm based boost control. I also want to try ecu boost and acheive the same thing but until then I chose to go with the AVC-R. I am glad to see the approach works as well as I thought it would! Congrats!