Stock turbo e85 reese tuned.
#46
Former Sponsor
iTrader: (79)
The highest HP car we have done a stock turbo was done yesterday at our shop. Ryans car put down 430tq and 429 whp and it has run a best of 10.5@128 so far with about 40 less hp. Thanks to Reese for sending us a set of thier cams to try out in this thing. Between those and swapping to the 9 turbo we were able to find some pretty good gains while moving the power band right.
-Em
-Em
#47
Evolved Member
iTrader: (6)
Join Date: Jun 2004
Location: Houston
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
The highest HP car we have done a stock turbo was done yesterday at our shop. Ryans car put down 430tq and 429 whp and it has run a best of 10.5@128 so far with about 40 less hp. Thanks to Reese for sending us a set of thier cams to try out in this thing. Between those and swapping to the 9 turbo we were able to find some pretty good gains while moving the power band right.
-Em
-Em
#51
Evolved Member
iTrader: (19)
Join Date: Oct 2003
Location: Cali
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
The highest HP car we have done a stock turbo was done yesterday at our shop. Ryans car put down 430tq and 429 whp and it has run a best of 10.5@128 so far with about 40 less hp. Thanks to Reese for sending us a set of thier cams to try out in this thing. Between those and swapping to the 9 turbo we were able to find some pretty good gains while moving the power band right.
-Em
-Em
#52
Evolving Member
iTrader: (5)
Join Date: Aug 2009
Location: Chicago
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Lets hear more about these Reese tuning 276 cams. I have not heard of this option yet. Do you have specs available? I am assuming mivec grinds are available. Price would be great as well - sorry to thread jack.
Back on topic, impressive results. Does anyone have any thoughts on the peak torque, stock block and gear - I always hear 400wtrq as the threshold but I feel that low RPM torque is more what breaks parts. All out on the track first gear the motor is not taking as much of the abuse if you push the trqq into the 450 ish range. And then from that point on the high trq levels are only in the high rpm range.
I think 450 trq vents rods through stock blocks when crusing at 70 in 5th and flooring it. Or crusing at 50 in 4th and going WOT. Just a thought.
Back on topic, impressive results. Does anyone have any thoughts on the peak torque, stock block and gear - I always hear 400wtrq as the threshold but I feel that low RPM torque is more what breaks parts. All out on the track first gear the motor is not taking as much of the abuse if you push the trqq into the 450 ish range. And then from that point on the high trq levels are only in the high rpm range.
I think 450 trq vents rods through stock blocks when crusing at 70 in 5th and flooring it. Or crusing at 50 in 4th and going WOT. Just a thought.
#53
Does anyone have any thoughts on the peak torque, stock block and gear - I always hear 400wtrq as the threshold but I feel that low RPM torque is more what breaks parts. All out on the track first gear the motor is not taking as much of the abuse if you push the trqq into the 450 ish range. And then from that point on the high trq levels are only in the high rpm range.
I think 450 trq vents rods through stock blocks when crusing at 70 in 5th and flooring it. Or crusing at 50 in 4th and going WOT. Just a thought.
I think 450 trq vents rods through stock blocks when crusing at 70 in 5th and flooring it. Or crusing at 50 in 4th and going WOT. Just a thought.
at 445tq a lot of people say thats crazy on stock turbo/block/cams. I dont know much about the theory behind it. but i was tuned to 401/445 by one of the more reputable shops in the midwest. i dont know what to think.
#55
Account Disabled
iTrader: (26)
Join Date: Jul 2011
Location: Clinton, NJ - Myrtle Beach, SC
Posts: 1,784
Likes: 0
Received 1 Like
on
1 Post
The highest HP car we have done a stock turbo was done yesterday at our shop. Ryans car put down 430tq and 429 whp and it has run a best of 10.5@128 so far with about 40 less hp. Thanks to Reese for sending us a set of thier cams to try out in this thing. Between those and swapping to the 9 turbo we were able to find some pretty good gains while moving the power band right.
-Em
-Em
Ridiculous...Do I hear a 9 second stock block/turbo evo soon?!
Also, great job tuning the car in the OP Mr. Reese!
#56
Newbie
Thread Starter
iTrader: (2)
Join Date: Dec 2010
Location: san marcos
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
i got this off of socalevo. i know he is making some for the 9 aswell. and the rt276 are on james reese rs
EVO 8 RT276KK cams is a 276 duration cam. The lift is 11.1mm both intake and exhaust. The center line will not be spoke of. They are a great cam for big power when utilizing ethanol.
EVO 8 RT276KK cams is a 276 duration cam. The lift is 11.1mm both intake and exhaust. The center line will not be spoke of. They are a great cam for big power when utilizing ethanol.