Mellon Racing - Joe’s EVO 9 * Stock Turbo * 385Hp @ 25Psi Hawaii Tuning Trip 2011
#1
Former Sponsor
Thread Starter
iTrader: (74)
Join Date: Mar 2008
Location: miami florida
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Mellon Racing - Joe’s EVO 9 * Stock Turbo * 385Hp @ 25Psi Hawaii Tuning Trip 2011
Mellon Racing - Joe’s EVO 9 * Stock Turbo * 385Hp @ 25Psi
Name: Joe
Forum Name: Forc F3d
Location: Wahiawa, Hawaii
2006 EVO 9 5-speed USDM
Stock Turbo
FIC Injectors
Wideband O2
MAP Rev3 Intake manifold
MAP Ported Exhaust Manifold,
MAP 02 Eliminator DP
ETS 3" Test Pipe Back
ETS 3.5" FMIC shot piping
ETS intake/K&N,
Tial Q bov
92 octane @ 25 Psi
VD 385 Hp / 352Tq
We are in Hawaii Tuning some evos, We got the oportunity to Tune Joes's evo 9 , super clean blue evo 9 btw very neat . The car made an impressive 385hp with 352TQ at 25psi on the stock turbo just with the very basic bolt ons .
Last edited by Gary@MellonRacing; Oct 18, 2011 at 04:17 PM.
#4
Account Disabled
iTrader: (38)
Join Date: Aug 2005
Location: Virginia Beach, Virginia
Posts: 9,319
Likes: 0
Received 1 Like
on
1 Post
Intially we were at 350awhp and I thought that was about right for stock cams on 92 octane. After triple checking the logs I noticed that it never had any knock so clearly it wasn't done. I think the mod choices really helped evacuate some of the heat that sets off knock. I pressed on with a little more timing until we consistently saw 380's in back to back runs. Pretty amazing for the mods no doubt. Most guys need cams, good weather and a great tune to get to his level.
#6
Account Disabled
iTrader: (38)
Join Date: Aug 2005
Location: Virginia Beach, Virginia
Posts: 9,319
Likes: 0
Received 1 Like
on
1 Post
I'm up for the boost leak test and a few more psi to see if we can crack 400. We had some good night air the other day so It's going to be difficult in the warmer weather but ya never know
Trending Topics
#9
Newbie
iTrader: (4)
Join Date: Oct 2010
Location: In the River that Falls MA
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
quick question and not trying to thread jack by any means but what was the "defining" mod on this build or iow what mod helped him make so much power with not even having cams?
Last edited by Rough_draft; Oct 18, 2011 at 12:06 PM.
#10
Evolving Member
iTrader: (3)
And looking at my mod list on here, its missing the rev3 intake manifold and a mil.spec 65mm TB. Could you update that for me Gary, to take away from any confusion?