I came down to AWD Motorsports to get some work done and a tune. Let me just start off by saying Diiirk did an Excellent job on the car. The car is on the STOCK block, STOCK head/unported and STOCK ECU. This was also done on 93 Pump gas + Aquamist Meth 100% VP M1 Methanol. We reached these numbers at ONLY 33psi. We could have gone higher but decided to stop here.




http://youtu.be/m1MEBEOCN1I

Mods that matter:

ETS HTA3586 .82 kit
ETS 3.5 FMIC
Buschur Racing Double pumper
Kelford 272 cams
Aquamist HSF1 2 nozzles 1.0mm .9mm
PTE 1000cc Injectors
JM FAB Drag Intake Manifold
L19 Head Studs
Cosworth HG
Grimspeed 3port ECU Boost
Speed Density Omni 4bar map
SparkTech COP
QM Twin Disc (older black style)

 

impressive!












in before the motor blows to pieces!

 

damn, how much torque did it make?

 

Time bomb.

 

Depending on tq, may not be. This is why I wanna go with a 35r. Big power up top. Tq is late in the rpm band, saving the rods.

I ave a better chance throwing a rod than he does, with my hta green lol.

 

God damn!!!! I though I was pushing it on mine with 577WHP! lol mine has deff not seen that amount of boost since it left the dyno, I dont want or need to blow it anytime soon. It's nice to have the bragging rights :-)

 

You have ***** my friend! Nice to see some guys pushing it. How much torque?

600hp can last a long time, it's all about how you treat and maintain the car. If you just put around town, and drive a lot on the highway with only a few passes down the track once a month or so, I would think a car with 600/400 could last a really long time. But then at those levels with a stock block the margin of error can't be too high. Bad batch of gas, meth malfunction, boost creep = kaboom.

 

IBTNE








In before the new engine

 

Thanks guys, I actually have 2 maps done. This one at 610whp and another one diiirk did for me with just straight 93oct at 22psi which i drive around on that wouldnt even threaten the block. I also have a 4g64 block that i got from AWD im in the process of building most likely a 2.1 that im going to get back togeather with Mike@AWD and Derek to put togeather a 9 sec car.

 

wow thats great bro ,, good job

 

that's very impressive, way to push the stock block

 

Depending on timing, I think 610whp on an Evo 8 is something like 435-440 ft lbs. I will have to look tonight when I get back home.

 

Congrats again Curtis!

I dont know if any of you guys read correctly on the other thread he has, his goal was to just hit 600 on stock block he doesnt plan on keeping it this way. This just really proves what the evo motor is capable of.

 

Stock block...is this real life ? Good Job.

 

damn that is impressive. And 8800 rpm?