I'm going to have to install door actuators for the locks. Does anyone have any bad experiences with aftermarket door actuators?

I'm looking to get this kit...

http://www.crutchfield.com/p_220PRPD...it.html?tp=154

Let me know your past experiances

 

Anyone?

Someone had to of done this to there RS....

 

i had actuators put in my Civic. i know its not an Evo, but its a similar set up. The only problem i ever had, a friend borrowed my car and forced one of the doors unlocked. I just had to take the door panel off and readjust the linkage on the actuator.

 

Thanks!

Thats exactly what im trying to figure out (Durability of the actuators). And also if its a hard install to do on an Evo.

 

i do alarms/remote starts for a living. i installed TONS of them. I have maybe had 1 or 2 ppl ever come back and get them fixed. As long as there mounted currectly they wont come loose

 

i did one on friends car and my trunk. no problem so far

 

I did alarm on my EX's RS. I used actuators out of a wrecked EVO I found hear on the forums and just ran the wiring from the alarm. Simple and didn't have to go through mounting aftermarket actuators.

 

Appeciate the response guys!

I guess ill go ahead and give it a try!

The chances of my finding used actuators from a crashed evo are probably slim to nothing. Ill give the aftermarket ones a try. Hopefully they dont give me any trouble.

 

if ur doing 2 wire actuators, on some alarms the worst part it wiring up the relays.

 

Well the kit im going to purchase already has the whole "Controller unit" with it so im hoping it wont be a hassle

 

yea u should be good. pretty easy install. just takes time to install it