View Poll Results: Does your DP rattle?
Yes
15
38.46%
No
24
61.54%
Voters: 39. You may not vote on this poll
POLL: Does your DP rattle?
#16
Former Sponsor
iTrader: (161)
no, I have a turbo xs dp. the f-ing thing hangs low, so I had to remove my braces.
I would have to add ~3-4mm of spacer on top of the spacers they sent just to get the braces to where they wont hit!!!!
No f-ing way......The braces just look like they were hanging low, ready to catch any unsuspecting piece of debris.
I guess the dp will be ok if I go with a 4g64 block?!?!!??!
I would have to add ~3-4mm of spacer on top of the spacers they sent just to get the braces to where they wont hit!!!!
No f-ing way......The braces just look like they were hanging low, ready to catch any unsuspecting piece of debris.
I guess the dp will be ok if I go with a 4g64 block?!?!!??!
#17
Newbie
iTrader: (2)
Join Date: Sep 2003
Location: Khalifornea
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
the helix pipe fits perfeect,but its too dam close to the oil pan and rear subframe..
mines touches rear subframe,if u use 2 hanger bushing it touches the frame..i just use one
and rattle is gone..
mines touches rear subframe,if u use 2 hanger bushing it touches the frame..i just use one
and rattle is gone..
#21
i have the helix 3 in and i heard about some of this before i installed it so i used header wrap for about a foot and a half, from the oil pan to just past the bars. no rattle what so ever.
Thread
Thread Starter
Forum
Replies
Last Post
Blue Evo 8
Evo Engine / Turbo / Drivetrain
6
Dec 12, 2005 06:02 PM
evosevengsr
Evo Engine / Turbo / Drivetrain
4
May 20, 2004 01:51 AM