comparing manifolds
#137
Account Disabled
iTrader: (1)
Join Date: Jun 2003
Location: NJ
Posts: 2,026
Likes: 0
Received 0 Likes
on
0 Posts
To me, this all sounds overly complicated for maybe the addition of 10WHP and minimal spoolup. I am really thinking Vs. what is actauly being presented is not worth the additional $$$$$$$$$$$$ for the cost of enrty. The way I see it that if you can see past the hype a nice ported cast manifold will offer 9/10's of what you need.
Then again this is my opinion and I could be wrong.
Then again this is my opinion and I could be wrong.
#139
It comes down to what you're using the car for, IMO.
If it's mainly a street car, stick with cast.
If it's a track car and you're looking to squeeze out every last ounce of power, go with a header.
As for who to buy it from, I'd go with whomever you're most comfortable buying from. Or who has the nicest collector and is willing to stand behind their product.
Joe
If it's mainly a street car, stick with cast.
If it's a track car and you're looking to squeeze out every last ounce of power, go with a header.
As for who to buy it from, I'd go with whomever you're most comfortable buying from. Or who has the nicest collector and is willing to stand behind their product.
Joe
#140
I'd also like to know the difference in weight between the stock or cast manifold and the tubular manifolds offered. The front of the Evo is a good place to lose all the weight you can
#142
Account Disabled
iTrader: (1)
Join Date: Jun 2003
Location: NJ
Posts: 2,026
Likes: 0
Received 0 Likes
on
0 Posts
I am wondering How well the Buschur Caste Manifold will flow or Even a Ported Stock Evo Manifold will flow Vs. the $1,000 Manifold. IDK,I really can't see past all this Hype. to me what is being presented is overly complicated.
#143
To me, having a tube header on a car is about squeezing every last ounce from your project. You can sustain more boost to redline with a properly thought through plumbing system. That includes good flow on both the intake and exhaust sides.
For a street car, it might be overkill. Most of the mani's sell because they look nice. I think there's only a few nutcases (myself included) that want one because it allows the motor to breathe a little better.
I don't know it all, but from my experience, the "perfect" manifold has equal length runners, a nice collector and not a lot of slag inside the tubing. But what the hell do I know?
For a street car, it might be overkill. Most of the mani's sell because they look nice. I think there's only a few nutcases (myself included) that want one because it allows the motor to breathe a little better.
I don't know it all, but from my experience, the "perfect" manifold has equal length runners, a nice collector and not a lot of slag inside the tubing. But what the hell do I know?
![Big Grin](https://www.evolutionm.net/forums/images/smilies/biggrin.gif)
#144
Evolved Member
iTrader: (53)
For anyone interested, the coated header that I posted pictures of above is for sale. This will mount a GT35R turbo in the EVO8. I have the turbos and oil lines too. YOU will have to fab your own 02 housing. It is a T3 flange. For a do-it-yourselfer this would be a cheap way to put a kit together.
$600 for the header, it's here if anyone wants it.
David Buschur
www.buschurracing.com
$600 for the header, it's here if anyone wants it.
David Buschur
www.buschurracing.com
Thread
Thread Starter
Forum
Replies
Last Post
Zandalution IX
Evo General
3
Nov 8, 2014 03:55 PM
RnR Racing
Vendor Service / Parts / Tuning Review
501
Feb 7, 2006 07:14 AM
EvoDaWayToGo
For Sale - Cars For Sale
3
Aug 9, 2005 09:21 PM