New Stock Turbo Record !!!!! 435 awhp 436tq!!!! STOCK ECU, STOCK BLOCK
#1
Newbie
Thread Starter
Join Date: Dec 2004
Location: Atlanta, GA
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
New Stock Turbo Record !!!!! 436 awhp 437tq!!!! STOCK ECU, STOCK BLOCK
Hey,
we just put down 436 awhp and 437 torque, std correction. 426 awhp and 427 tq sae corrected. This was done on a flashed ecu, methanol injection, 50% c16 50% 93 octane. We left the stock intake manifold on for now. We put our new aem cdi with the msd coils on last night when the car broke up at 25 psi. The boost on the dyno run peaked to 28 psi and fell to about 25 psi then fell to 23 psi at redline. This was done with the new gsc 272 cams, they are exactly like the hks 272 cams but waaaaay less expensive.
I am putting in the aem stand alone tomorrow, i should see 450 to the wheels with the upgraded actuator, full tank of c16, and fresh methanol.
I will post again tomorrow.
we just put down 436 awhp and 437 torque, std correction. 426 awhp and 427 tq sae corrected. This was done on a flashed ecu, methanol injection, 50% c16 50% 93 octane. We left the stock intake manifold on for now. We put our new aem cdi with the msd coils on last night when the car broke up at 25 psi. The boost on the dyno run peaked to 28 psi and fell to about 25 psi then fell to 23 psi at redline. This was done with the new gsc 272 cams, they are exactly like the hks 272 cams but waaaaay less expensive.
I am putting in the aem stand alone tomorrow, i should see 450 to the wheels with the upgraded actuator, full tank of c16, and fresh methanol.
I will post again tomorrow.
Trending Topics
#10
Newbie
Thread Starter
Join Date: Dec 2004
Location: Atlanta, GA
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
its not a specific kit,
a hobbs pressure switch, methanol pump, a couple lights and switches and a nozzle..5 zip ties, hose and some hose clamps, and a steady state relay hooked up to the number 4 injector, and some wire.
.
dan
a hobbs pressure switch, methanol pump, a couple lights and switches and a nozzle..5 zip ties, hose and some hose clamps, and a steady state relay hooked up to the number 4 injector, and some wire.
.
dan
Last edited by namahs; Mar 10, 2005 at 04:00 PM.