Weapon-R Secret Weapon Intake
#1
Evolved Member
Thread Starter
iTrader: (11)
Join Date: May 2002
Location: Eastlake, OH
Posts: 1,230
Likes: 0
Received 0 Likes
on
0 Posts
Weapon-R Secret Weapon Intake
I've browsed the evom forums and could not find any info on the weapon-r secret weapon intake(this is short ram not cold air).
So i decided to buy one. i got mine through prostreetonline and i'll be receiving it thursday. I'm going to install it this saturday with the help of HotShot940. I'll give you guys a little write up after install.
Specs: 50,000 mile warrenty
Flows 800 CFM
Higher Flowing Foam Filtering Element
Thick Interlocking Cell Polyurethane Foam/ Rated at 300 pores per sq in.
12 Times Thicker than PAPER of GAUZE
True Air Flow Velocity Stack in Air Filter
*******************
So i decided to buy one. i got mine through prostreetonline and i'll be receiving it thursday. I'm going to install it this saturday with the help of HotShot940. I'll give you guys a little write up after install.
Specs: 50,000 mile warrenty
Flows 800 CFM
Higher Flowing Foam Filtering Element
Thick Interlocking Cell Polyurethane Foam/ Rated at 300 pores per sq in.
12 Times Thicker than PAPER of GAUZE
True Air Flow Velocity Stack in Air Filter
*******************
#6
Evolved Member
Thread Starter
iTrader: (11)
Join Date: May 2002
Location: Eastlake, OH
Posts: 1,230
Likes: 0
Received 0 Likes
on
0 Posts
Alright guys well i finally installed it (with the help of Hot Shot940). Install was pretty easy. The intake fits in their really snug. It took about 45min. to complete. After we finished we let the car idle for about 10min. then off we went. I noticed i could hear the turbo more and the intake is pretty loud. From the butt dyno i noticed a slight power increase, but i dont like to rely on that. Well i recommend this intake to anyone considering it.
[IMG]Pictures 007[/IMG]
[IMG]Pictures 007[/IMG]
Trending Topics
#12
Evolved Member
iTrader: (4)
Join Date: Oct 2003
Location: Columbus, Ohio
Posts: 1,555
Likes: 0
Received 0 Likes
on
0 Posts
Look at my hand, chilling in that first picture, in all it's glory.
This intake is pretty cool, the install is easy and it sounds nice. Can't really say a whole lot more about it yet since I havn't driven it or been in the car that long with it to really push it hard. No idling issues whatsoever and we are still VTA without any problems at all. Brunos evo taking mods like a champ, once again!
This intake is pretty cool, the install is easy and it sounds nice. Can't really say a whole lot more about it yet since I havn't driven it or been in the car that long with it to really push it hard. No idling issues whatsoever and we are still VTA without any problems at all. Brunos evo taking mods like a champ, once again!
Thread
Thread Starter
Forum
Replies
Last Post
FS[West]: 2003 Lancer ES w/ Built N/A DOHC 4G93E
Midnightkid
For Sale - Cars For Sale
0
May 16, 2015 01:40 PM