I cant open the packaging now because they are at a different location while I move. Do you really need to see better pics though? The Ralliart mounts will fit in the stock mounts, thats not the problem.

The problem is the rearmost mount. You should look at it while your car is apart. The ralliart kit does not replace the small bushing in the rear mount. Please refer to the pictures I uploaded in post #13 in this thread.

For a complete solution Chris, I would need the spacer sleeve for the front lower mount and the bushing replaced in the rear lower mount like stated above.

The motor mounts would then be a complete solution imo.

Let me know what you think!
-Russell K

 

I have a guy that will be making the sleeve for the front lower motor mount, and a bushing for the rear lower motor mount. He will be using high quality aluminum for the bushing and the sleeve. It will be a few weeks before we know a price and eta for these. Basically you would need to buy the RalliArt bushings from a vendor on here (I suggest Z1) and then buy the parts from my guy making these and you will be all set to have a movement free drivetrain!

Let me know Guys,
Russell K

 

Interesting indeed... I'm sure your guy's bushing is going to be a press fit?

 

Zeus-Yes it will be a press-fit! I thought you would be interested in this. Its a shame so few care about this. I will PM you once we get things rolling.

-Russell K

 

Ya im interested too please let me know how things are going.

Thanx
Chris

 

Thanks... too bad, I will have the tranny out next Thurday... hunting a gremilin.