HKS 3037s Spool Up
May 10, 2005, 10:13 AM
#1
Evolving Member
Thread Starter
iTrader: (1)
Join Date: May 2003
Location: Boca Raton, FL
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
HKS 3037s Spool Up
Hi guys
I'll like to get feedback from those who have used the 3037. I'll like to know at what rpms do you achieve 22psi on a 2.0l block.
Thanks
Ben
I'll like to get feedback from those who have used the 3037. I'll like to know at what rpms do you achieve 22psi on a 2.0l block.
Thanks
Ben
Trending Topics
May 10, 2005, 10:35 PM
#9
Evolved Member
iTrader: (7)
Join Date: Jul 2003
Location: Los Angeles
Posts: 1,993
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by woobos
yes i have, Quite disappointed with the results. Only netted 402whp on pump. Spool up was just horrible.
Ben
Ben
May 10, 2005, 10:37 PM
#10
Evolving Member
Thread Starter
iTrader: (1)
Join Date: May 2003
Location: Boca Raton, FL
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by alex_alex
yeah, the HKS turbo sucks, the A/R is all wrong from what i hear. Take a look at the spool on the Vishnu 3037 with the .63 a/r ( i think). IE Evo's spooled pretty damn quick
Thanks
Ben
May 11, 2005, 07:04 AM
#11
Evolved Member
iTrader: (8)
Join Date: Nov 2003
Location: Salem, OR
Posts: 2,064
Likes: 0
Received 0 Likes
on
0 Posts
From the results I have seen, A .87 A/R housing won't spool until 5000-5200rpm. A .73 will spool up around 4600-4800rpm. I think the problem w/ the HKS3037 is due to its smaller frame when compared to a standard GT3037.
On my GT3076 I get 23 psi around 4300rpm.
On my GT3076 I get 23 psi around 4300rpm.
May 11, 2005, 07:14 AM
#12
Evolving Member
Thread Starter
iTrader: (1)
Join Date: May 2003
Location: Boca Raton, FL
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jj_008
From the results I have seen, A .87 A/R housing won't spool until 5000-5200rpm. A .73 will spool up around 4600-4800rpm. I think the problem w/ the HKS3037 is due to its smaller frame when compared to a standard GT3037.
On my GT3076 I get 23 psi around 4300rpm.
On my GT3076 I get 23 psi around 4300rpm.
Thanks for the reply....what do you mean by smaller frame?
thanks
May 11, 2005, 07:20 AM
#13
Evolved Member
iTrader: (8)
Join Date: Nov 2003
Location: Salem, OR
Posts: 2,064
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by woobos
Hi
Thanks for the reply....what do you mean by smaller frame?
thanks
Thanks for the reply....what do you mean by smaller frame?
thanks
May 11, 2005, 07:25 AM
#14
Evolved Member
iTrader: (2)
Join Date: Jul 2004
Location: in front of your car
Posts: 2,356
Likes: 0
Received 0 Likes
on
0 Posts
i think it's all in the tuning. i know a guy with an early 90's mazda mx-6 w/a turbonetics T70 on a 2.0 spooling @ 4K rpm. that car runs 10.80's on slicks. On his EVO with a 4G64 block, his STOCK turbo is at full spool by 2200, YES, 2200 RPM's!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
it is very possible to attain stock or near stock spool w/a larger turbo. this same guy can get a Greddy T67 on a stock motor to spool up by 3K rpm also. norris design & rc developments out of the UK have been doing this for years.
it is very possible to attain stock or near stock spool w/a larger turbo. this same guy can get a Greddy T67 on a stock motor to spool up by 3K rpm also. norris design & rc developments out of the UK have been doing this for years.
Last edited by housedj; May 11, 2005 at 07:27 AM.
