Official HKS EVC V settings thread
#1
Official HKS EVC V settings thread
Ok guys I know there are some settings floating about but I just felt that there is a need for an official thread on this to consolidate this info. I'll start, I currently run an offset of 150 and a gain of 72 to give me acceptable spool time and boost. I'm beginning to suspect that I have a boost leak though... Your shared input on your settings is greatly appreciated.
Josh
Josh
#6
Evolving Member
iTrader: (2)
Join Date: Jul 2003
Location: Cerritos, CA
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
I am running 76 with offset of 100 (didnt play with this yet). THis give me a peak of 20.3
THere will be some variability among the setting and the boost achieved due to different parts, ie aftermarket BOV.
THere will be some variability among the setting and the boost achieved due to different parts, ie aftermarket BOV.
Trending Topics
#8
Newbie
iTrader: (1)
Join Date: Jan 2005
Location: myrtle beach
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
i've been messing around with my settings...i've found that my car feels the strongest running 100 gain and 150 offset...those settings seem to keep my boost peaking around 23 psi and dropping to around 21 psi...i found the best way to dial it in for me was to set the offset to 200 (max) and gain at 100 (max) and work the offset down to my desired psi level...oh and these were third gear pulls, so i may have to set the offset higher on the other setting for highway driving...
Last edited by calvin; Aug 30, 2005 at 07:59 PM.
#9
Hi all. I have just installed a EVC V (technically, it is being installed as I post and this is my first post btw). The unit I purchased did not come with an English user manual. I was wondering if you guys know if there was one available on the net. I checked the HKS website and could not find anything. Like mitsuorder mentioned, it appears to have been taken out of their website. Appreciate any help.
#13
Evolving Member
iTrader: (7)
Join Date: Aug 2004
Location: FAAAR FAAAR AWAAY :)
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
On mine I cannot select offset eventhough on instructions it says I can. I think i have different (offsetless version) anyone has same problem?
Originally Posted by Blue Evo 8
read the instructions that came with your EVC
#15
Evolved Member
iTrader: (27)
Originally Posted by mikiblueeyes
On mine I cannot select offset eventhough on instructions it says I can. I think i have different (offsetless version) anyone has same problem?
Sure you can hit "mod" and hold till it beeps and do it a second time this will bring you to 7 which is your "A" boost and 8 is your "B" boost.