Whinning noise after install white rabbit
Jul 10, 2005, 02:43 PM
#32
Evolving Member
Thread Starter
iTrader: (11)
Join Date: Oct 2004
Location: California
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
I trying to find out if it's that's just how White rabbit sound when it spools up
it actually sounds pretty cool
but it's 10x louder than stock
the whining is your turbo!
it actually sounds pretty cool
but it's 10x louder than stock
Originally Posted by BBYBruno
the whining is your turbo!
Jul 10, 2005, 02:43 PM
#33
Evolved Member
iTrader: (6)
Join Date: Jul 2002
Location: Wherever WOT Takes Me..
Posts: 629
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by superman105
I was wondering the same thing
but the lower Ic never taken off of the Stock turbo until this morning
from factory there is no gasket
but the lower Ic never taken off of the Stock turbo until this morning
from factory there is no gasket
Definitely check that spot and if you lost the stock gasket order a replacement, on my car with the greddy discharge pipe in place and the stock gasket with some permablack theres absolutely no leak.
Jul 10, 2005, 02:46 PM
#34
Evolving Member
Thread Starter
iTrader: (11)
Join Date: Oct 2004
Location: California
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
I have the 2005 GSR
I dont see any gasket
tomorrow I will go to the dealer and have them check if there I can buy a gasket to go on there
tks
I dont see any gasket
tomorrow I will go to the dealer and have them check if there I can buy a gasket to go on there
tks
Originally Posted by fury656
There is definitely a gasket there stock, its metal. I had a leak issue at that same spot when a shop installed my Greddy lower i/c pipes and the turbo was incredible loud building boost with a composite gasket that wasnt able to seal fully and the pipe properly torqued.
Definitely check that spot and if you lost the stock gasket order a replacement, on my car with the greddy discharge pipe in place and the stock gasket with some permablack theres absolutely no leak.
Definitely check that spot and if you lost the stock gasket order a replacement, on my car with the greddy discharge pipe in place and the stock gasket with some permablack theres absolutely no leak.
Jul 10, 2005, 03:21 PM
#35
Evolving Member
Thread Starter
iTrader: (11)
Join Date: Oct 2004
Location: California
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Gonna go to Autozone and get some gasket material to put in between the turbo compressor outlet and the black Helix pipe.
I hope this will solve the whinning noise
I hope this will solve the whinning noise
Jul 10, 2005, 03:32 PM
#38
Evolving Member
Thread Starter
iTrader: (11)
Join Date: Oct 2004
Location: California
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
is that the same sealant
you use when you install cams around the valve cover and TPS sensor ?
you use when you install cams around the valve cover and TPS sensor ?
Originally Posted by gsujeff55
Use RTV sealant with it.
Jul 10, 2005, 03:36 PM
#40
Former Vendor
iTrader: (107)
Join Date: Sep 2004
Location: A.K.A. DaFarmer
Posts: 4,364
Likes: 0
Received 0 Likes
on
0 Posts
wow your typing is horrible.. my opion is you should have left this job too a professional.. you dont have enough expierence to know there should be a gasket there, you dont know what the difference between a big turbo whine and a leak, and lastly do not just put rtv in there, you use that only in conjunction with a new gasket..
Jul 10, 2005, 03:39 PM
#42
Have you tried to get a hold of FP and ask them what they think. My guess is that it is just a bigger turbo so, it will be louder. But I couldnt say for sure because I have never heard the WR. Definatly use a gasket in place of rtv..
good luck..
good luck..
Jul 10, 2005, 03:41 PM
#43
Originally Posted by dafarmer69
wow your typing is horrible.. my opion is you should have left this job too a professional.. you dont have enough expierence to know there should be a gasket there, you dont know what the difference between a big turbo whine and a leak, and lastly do not just put rtv in there, you use that only in conjunction with a new gasket..
Jul 10, 2005, 03:42 PM
#44
Originally Posted by kmcconn9
Have you tried to get a hold of FP and ask them what they think. My guess is that it is just a bigger turbo so, it will be louder. But I couldnt say for sure because I have never heard the WR. Definatly use a gasket in place of rtv..
good luck..
good luck..
