installed my XSPower intercooler this week
#182
LICP only - http://cgi.ebay.com/ebaymotors/EVO-V...85274741QQrdZ1
i paid $180 shipped for the IC, LICP and UICP a while back.
#183
Evolved Member
iTrader: (6)
Join Date: Nov 2005
Location: Portland, OR
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
I had an XS Power intercooler on my 507 horse SRT-4. My old SRT-4 was the fastest stock motor/bottom end car in the nation. Does that say something? Also stock intercooler intake temps were datalogged at 92-95* in boost on a 70 degree day. The intercooler was installed and on a similair day the intake temps were datalogged at 72-75* at WOT.
Ummm I think they work fine and I will purchase one for my Evo soon enough.
Ummm I think they work fine and I will purchase one for my Evo soon enough.
This is the type of proof that this thread needs.
#184
Evolved Member
iTrader: (12)
Peace of mind? What piece of mind?
Who is to say that you wouldn't have less chance of problem with XS over "brand X". Why is this XS Power FMIC such a mystery?
If this has never happended, then why are we even talking about sucking in cooling fins.
The subject is ridiculous.
Its just like ARP studs. I sell them, I use them. Has anyone ever stretched the stock bolts? No.
People are strange.
Who is to say that you wouldn't have less chance of problem with XS over "brand X". Why is this XS Power FMIC such a mystery?
If this has never happended, then why are we even talking about sucking in cooling fins.
The subject is ridiculous.
Its just like ARP studs. I sell them, I use them. Has anyone ever stretched the stock bolts? No.
People are strange.
both turboxs AND garrett, EVEN spearco cores (and i don't know WHY ****in' idiots say those intercoolers are good...) have MUCH WORSE BRAZING THAN THIS CHINESE TAIWANESE FOREIGN MADE CORES. SUCK IT.
just look at the pics. then look inside a turboxs core and you'll see an accordian with ROUNDED contacts and INCONSISTENT brazing seals to the fins. same with spearco, same with garrett. in fact garrett's brazing is so made in mexico bad, that buschur's own cores have been delivered leaking at the plates.
so please spare me the stupidity. it's obvious just from pictures that those fins are more precision made. they look like arc intercooler fins. each one square as a T and flatly brazed.
Last edited by trinydex; Feb 1, 2007 at 08:27 PM.
#186
Evolved Member
iTrader: (13)
Join Date: Sep 2006
Location: SlowmotionMotorsports.com
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
i'm absolutely astounded that you folks are so stupid. look at the damn pictures. LOOK AT THE ****STICKING PICTURES
both turboxs AND garrett, EVEN spearco cores (and i don't know WHY ****in' idiots say those intercoolers are good...) have MUCH WORSE BRAZING THAN THIS CHINESE TAIWANESE FOREIGN MADE CORES. SUCK IT.
just look at the pics. then look inside a turboxs core and you'll see an accordian with ROUNDED contacts and INCONSISTENT brazing seals to the fins. same with spearco, same with garrett. in fact garrett's brazing is so made in mexico bad, that buschur's own cores have been delivered leaking at the plates.
so please spare me the stupidity. it's obvious just from pictures that those fins are more precision made. they look like arc intercooler fins. each one square as a T and flatly brazed.
both turboxs AND garrett, EVEN spearco cores (and i don't know WHY ****in' idiots say those intercoolers are good...) have MUCH WORSE BRAZING THAN THIS CHINESE TAIWANESE FOREIGN MADE CORES. SUCK IT.
just look at the pics. then look inside a turboxs core and you'll see an accordian with ROUNDED contacts and INCONSISTENT brazing seals to the fins. same with spearco, same with garrett. in fact garrett's brazing is so made in mexico bad, that buschur's own cores have been delivered leaking at the plates.
so please spare me the stupidity. it's obvious just from pictures that those fins are more precision made. they look like arc intercooler fins. each one square as a T and flatly brazed.
And I rest my case....these intercoolers are fine to use. I used one of these cores on my SRT with great results! Oh and the SRT made 507whp so suck it all!
#187
Evolved Member
Join Date: Jun 2006
Location: Jacksonville/Boca Raton
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
How is a fin going to get sucked in to the intake tract and the motor? Please explain to me how a fin, which is located on the outside of the plate section, going to magically get inside of the plate?
#191
Evolved Member
iTrader: (50)
i'm absolutely astounded that you folks are so stupid. look at the damn pictures. LOOK AT THE ****STICKING PICTURES
both turboxs AND garrett, EVEN spearco cores (and i don't know WHY ****in' idiots say those intercoolers are good...) have MUCH WORSE BRAZING THAN THIS CHINESE TAIWANESE FOREIGN MADE CORES. SUCK IT.
just look at the pics. then look inside a turboxs core and you'll see an accordian with ROUNDED contacts and INCONSISTENT brazing seals to the fins. same with spearco, same with garrett. in fact garrett's brazing is so made in mexico bad, that buschur's own cores have been delivered leaking at the plates.
so please spare me the stupidity. it's obvious just from pictures that those fins are more precision made. they look like arc intercooler fins. each one square as a T and flatly brazed.
both turboxs AND garrett, EVEN spearco cores (and i don't know WHY ****in' idiots say those intercoolers are good...) have MUCH WORSE BRAZING THAN THIS CHINESE TAIWANESE FOREIGN MADE CORES. SUCK IT.
just look at the pics. then look inside a turboxs core and you'll see an accordian with ROUNDED contacts and INCONSISTENT brazing seals to the fins. same with spearco, same with garrett. in fact garrett's brazing is so made in mexico bad, that buschur's own cores have been delivered leaking at the plates.
so please spare me the stupidity. it's obvious just from pictures that those fins are more precision made. they look like arc intercooler fins. each one square as a T and flatly brazed.
I would love to know, seriously.
#195
Evolved Member
iTrader: (125)
Edit: studying the pics more. AMS core does have a denser fin structure. 38 fins in a row. The XSP has 30 fins per row. And the rows ofthe XSP are wider. There are blocks on the ends of AMS core making the row not as long. This means the AMS fin count per inch is a good bit higher. This will never be solved until someone test both cores back to back on high HP car.
Last edited by 94AWDcoupe; Feb 9, 2007 at 09:38 PM.