how to install zeitronix zt2?
Dec 1, 2006, 10:53 PM
#77
Evolving Member
iTrader: (22)
Join Date: Jul 2005
Location: Oregon
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TTP Engineering
This is a technical thread.
The purple wire is "simulated narrowband output" and is not needed when running a stock front O2 sensor. It DOES NOT go to AEM or any standalone ECU.
Last edited by Zeus; Dec 2, 2006 at 11:41 PM.
Dec 2, 2006, 09:53 AM
#78
Evolved Member
iTrader: (4)
Join Date: Sep 2003
Location: Kingdom of Saudi Arabia
Posts: 3,456
Likes: 0
Received 0 Likes
on
0 Posts
does the IX use the same pinout same pinout too?
[QUOTE=TTP Engineering]
[QUOTE=TTP Engineering]
Originally Posted by AznFlip
Can somone complete and correct this.
Zt-2 Pin #..............ECU Pin #
1........................25 YES
2............................ IN YOUR CASE, NOT USED.
3............................58 YES
4.....WITHOUT BOOST SENSOR= NOT USED -OUTPUT FROM BOOST SENSOR ORANGE
6............................81 YES
7............................26 YES
8............................92 THAT IS FINE
9............................... NOT USED
10..........................84 YES
11............................. WITHOUT BOOST SENSOR= NOT USED, WITH SENSOR=92
12............................. NOT USED IN STANDARD INSTALLATION
Zt-2 Pin #..............ECU Pin #
1........................25 YES
2............................ IN YOUR CASE, NOT USED.
3............................58 YES
4.....WITHOUT BOOST SENSOR= NOT USED -OUTPUT FROM BOOST SENSOR ORANGE
6............................81 YES
7............................26 YES
8............................92 THAT IS FINE
9............................... NOT USED
10..........................84 YES
11............................. WITHOUT BOOST SENSOR= NOT USED, WITH SENSOR=92
12............................. NOT USED IN STANDARD INSTALLATION
Dec 3, 2006, 07:07 AM
#80
Evolved Member
iTrader: (4)
Join Date: Sep 2003
Location: Kingdom of Saudi Arabia
Posts: 3,456
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TTP Engineering
Evo IX is a 3 prong plug and connections are located in different places than the 2003-2005, 4 prong plug naturally.
Dec 3, 2006, 10:37 AM
#82
Evolving Member
iTrader: (22)
Join Date: Jul 2005
Location: Oregon
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
I just noticed on my zeitronix 12 pin harness #2white it shows labeled in instructions is actually Green on my harness and #3 pin is white. I am not getting any rpm readout on my stock tach. So are the wire colors just mixed up on my harness and can i wire it with #3 to pin 58 stock ecu?? Thanks
Dec 3, 2006, 10:59 AM
#83
Originally Posted by LimPShoT
I just noticed on my zeitronix 12 pin harness #2white it shows labeled in instructions is actually Green on my harness and #3 pin is white. I am not getting any rpm readout on my stock tach. So are the wire colors just mixed up on my harness and can i wire it with #3 to pin 58 stock ecu?? Thanks
This is Version 11 Zeitronix. The pinout has a hard time keeping up with the advances in the product. The colors will always be correct though. They are the same colors as a SAFC would have for the same connections. Gray is TPS and Green is always TACH.
Aug 30, 2009, 07:10 PM
#87
Evolved Member
iTrader: (8)
Join Date: Feb 2006
Location: NJ
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=TTP Engineering;2533575]
For the EVO 9 with 02 and sensors, does this sound right?
Zt-2 Pin #...................... ECU Pin #
1 Red .............................. 68 (ECU Switched +12V)
2 White .......................... NOT USED.
3 Green .......................... 45 (ECU RPM)
4 Orange ........................ BOOST SENSOR - Green
5 -------------------------
6 Yellow .......................... BOOST SENSOR - Yellow
7 Black ............................ 46 or 58 (ECU Ground) - or any Ground
8 Brown .......................... 46 or 58 (ECU Ground)
9 Purpule ......................... NOT USED
10 Grey ........................... 78 (ECU TPS)
11 Brown ......................... BOOST SENSOR - Black
12 Blue ............................. NOT USED
Originally Posted by AznFlip
Can somone complete and correct this.
Zt-2 Pin #................ECU Pin #
1........................25 YES
2............................ IN YOUR CASE, NOT USED.
3............................58 YES
4.....WITHOUT BOOST SENSOR= NOT USED -OUTPUT FROM BOOST SENSOR ORANGE
6............................81 YES
7............................26 YES
8............................92 THAT IS FINE
9............................... NOT USED
10..........................84 YES
11............................. WITHOUT BOOST SENSOR= NOT USED, WITH SENSOR=92
12............................. NOT USED IN STANDARD INSTALLATION
Zt-2 Pin #................ECU Pin #
1........................25 YES
2............................ IN YOUR CASE, NOT USED.
3............................58 YES
4.....WITHOUT BOOST SENSOR= NOT USED -OUTPUT FROM BOOST SENSOR ORANGE
6............................81 YES
7............................26 YES
8............................92 THAT IS FINE
9............................... NOT USED
10..........................84 YES
11............................. WITHOUT BOOST SENSOR= NOT USED, WITH SENSOR=92
12............................. NOT USED IN STANDARD INSTALLATION
Zt-2 Pin #...................... ECU Pin #
1 Red .............................. 68 (ECU Switched +12V)
2 White .......................... NOT USED.
3 Green .......................... 45 (ECU RPM)
4 Orange ........................ BOOST SENSOR - Green
5 -------------------------
6 Yellow .......................... BOOST SENSOR - Yellow
7 Black ............................ 46 or 58 (ECU Ground) - or any Ground
8 Brown .......................... 46 or 58 (ECU Ground)
9 Purpule ......................... NOT USED
10 Grey ........................... 78 (ECU TPS)
11 Brown ......................... BOOST SENSOR - Black
12 Blue ............................. NOT USED
Aug 31, 2009, 08:57 AM
#88
Evolved Member
iTrader: (8)
Join Date: Feb 2006
Location: NJ
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=18bora;7454757]
For the EVO 9 with 02 and sensors, does this sound right?
Zt-2 Pin #...................... ECU Pin #
1 Red .............................. 68 (ECU Switched +12V)
2 White .......................... NOT USED.
3 Green .......................... 45 (ECU RPM)
4 Orange ........................ BOOST SENSOR - Green
5 -------------------------
6 Yellow .......................... BOOST SENSOR - Yellow
7 Black ............................ 46 or 58 (ECU Ground) - or any Ground
8 Brown .......................... 46 or 58 (ECU Ground)
9 Purpule ......................... NOT USED
10 Grey ........................... 78 (ECU TPS)
11 Brown ......................... BOOST SENSOR - Black
12 Blue ............................. NOT USED
Anyone?
For the EVO 9 with 02 and sensors, does this sound right?
Zt-2 Pin #...................... ECU Pin #
1 Red .............................. 68 (ECU Switched +12V)
2 White .......................... NOT USED.
3 Green .......................... 45 (ECU RPM)
4 Orange ........................ BOOST SENSOR - Green
5 -------------------------
6 Yellow .......................... BOOST SENSOR - Yellow
7 Black ............................ 46 or 58 (ECU Ground) - or any Ground
8 Brown .......................... 46 or 58 (ECU Ground)
9 Purpule ......................... NOT USED
10 Grey ........................... 78 (ECU TPS)
11 Brown ......................... BOOST SENSOR - Black
12 Blue ............................. NOT USED
Aug 31, 2009, 09:20 AM
#89
[QUOTE=18bora;7454757]
For the EVO 9 with 02 and sensors, does this sound right?
Zt-2 Pin #...................... ECU Pin #
1 Red .............................. 68 (ECU Switched +12V)
3 Green .......................... 45 (ECU RPM)
4 Orange ........................ BOOST SENSOR - Green
6 Yellow .......................... BOOST SENSOR - Yellow
7 Black ............................ 46 or 58 (ECU Ground) - or any Ground
10 Grey ........................... 78 (ECU TPS)
11 Brown ......................... BOOST SENSOR - Black
Just worry about these.
For the EVO 9 with 02 and sensors, does this sound right?
Zt-2 Pin #...................... ECU Pin #
1 Red .............................. 68 (ECU Switched +12V)
3 Green .......................... 45 (ECU RPM)
4 Orange ........................ BOOST SENSOR - Green
6 Yellow .......................... BOOST SENSOR - Yellow
7 Black ............................ 46 or 58 (ECU Ground) - or any Ground
10 Grey ........................... 78 (ECU TPS)
11 Brown ......................... BOOST SENSOR - Black