Hey guys quick question. Im just about to install the hallman mbc on my friends Evo, which part of the boost controller goes to the wastegate, is it the bottom one? I know with my turbo xs is set up that way, heres what is gona be installed. I made a search like crazy and could not find it, thanks

 

The side one.

 

yea, the side goes to the wastegate, and the bottom will go to either the turbo outlet pipe nipple or T off the BOV line...

dont forget zipties

 

Thank you guys

 

the side nipple. it has a little "wastegate reset" hole drilled on it.

 

I have mines installed to the turbo and wastegate. Using the BOV line is good with the stock BOV, but if you are using a different BOV, using the turbo will work better and thats from experience

 

^ I'm using a different BOV and the BOV line, works fine.

 

The answer to this is both in the instruction manual that comes with the Hallman and in the installation guide on the Hallman website.

 

Works great...as in you see low traps speeds at the track?

 

The BOV I am using is a Forge Bov, When I had the Hallman on the BOV line, it cause stuttering when i let go off the gas pedal. But on the turbo line it did not. So I should have been specific on the Forge BOV. The manual does indicate that both ways it can be installed.

 

https://www.evolutionm.net/forums/sh...03&postcount=2
https://www.evolutionm.net/forums/sh...d.php?t=116017
https://www.evolutionm.net/forums/sh...d.php?t=113293