Longitudinal 4G63?
#17
Evolved Member
iTrader: (12)
When I was looking into getting a 4G64 for my DSM a few years ago, I found that there are two versions of the engine. One that bolts to a 12.25" bell-housing, and one that bolts to a 13.25" bell-housing. The 12.25" bell-housing block is that one that will bolt to the DSM trannies. The larger bell-housing motor came out of the Mighty Max.
http://www.roadraceengineering.com/m...plications.htm
If you want to build up a 4g64 motor and mount it longitudinally, I say get the Mighty Max motor and tranny and build those up. Mount a 4g63 DOHC head on it too.
http://www.roadraceengineering.com/m...plications.htm
If you want to build up a 4g64 motor and mount it longitudinally, I say get the Mighty Max motor and tranny and build those up. Mount a 4g63 DOHC head on it too.
#18
Evolved Member
iTrader: (16)
Originally Posted by boomtown
Behold the Mighty Max:
![](http://www.nctd.com/95/95mightymax.jpg)
It was made by Mitsi around 1989 to 1995 roughly. Im sure you could just get a tranny shipped from the US or Japan if they arent in Europe.
![](http://www.nctd.com/95/95mightymax.jpg)
It was made by Mitsi around 1989 to 1995 roughly. Im sure you could just get a tranny shipped from the US or Japan if they arent in Europe.
![Off-Topic](https://www.evolutionm.net/forums/images/smilies/offtopic.gif)
Thread
Thread Starter
Forum
Replies
Last Post
trinydex
Evo Engine / Turbo / Drivetrain
9
Mar 24, 2007 12:24 PM
4g63, 4g64, applications, bike, block, conversion, engine, europe, evo, kit, longitudinal, longitudonal, project, starion, wide