I ordered all of them off of NAPA, I had the SAMCO hoses on hand and measured all of them this is what I ordered
2 1.560-1.810 in. t-bolts SME-240175
2 1.810-2.060 in. t-bolts SME-240200
7 2.690-2.870 in. t-bolts SME-240275
1 2.690-2.870 in. t-bolts SME-240300

keep in mind these measurements are for the samco hose kit, I paid a total of $70 shipped for all of the above, I'll post pics up once I get them installed.

 

anybody know the length of the hose that goes from the licp to the turbo
i the the diameter is 2" but what is the lengh?

 

what did you end up doing?

is there a tbolt clamp from napa for the lower intercooler piping that connects to black pressure pipe to turbo?

 

I bought the silicon intakes package set but the t-bolt on the LICP -> black coupler is a bit too big and just bottoms out (it's the 2.0" in the pics). Even though it's bottomed out, I can still turn the black couple so I know said clamp included is a bit too big.

AWAB clamps are also very good (marine grade)



Only problem is that it's not completely banded like a t-bolt, hence the section where the screw mechanism is tends to dig into silicon.

Anybody know of the proper napa part number for the 2.0" t-bolts?

 

I just bought all new clamps and couplers from siliconeintakes.com
Can't wait for them!