2.3l stroker questions
#46
Newbie
Thread Starter
Join Date: Jan 2006
Location: cape coral florida
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
i just want tell everyone that had some good feed back about this question....thanks...
i did not start this tread to cause a bunch of little arguments, and certainly not to have have my credibility questioned. like i said before, i was only trying to help someone out.
i did not start this tread to cause a bunch of little arguments, and certainly not to have have my credibility questioned. like i said before, i was only trying to help someone out.
#47
Evolved Member
iTrader: (3)
Originally Posted by mitsitech
ok guys, the newbie has another question......i did a search and didnt find what i need......anyway like i said in othet post, i work at a mitsu dealer in sw florida, and am trying to do some work on modded evos....i like doing it and the dealer will let me do it within reason....
anyway here is the question......i have a customer that brought in an 05 evo mr for an a/c problem which was a quick fix, but talking to him i find out that he has a 2.3 stroker motor in car, with alot of other the things done also.....this car is no joke!
anyway, my only concern for him is that it has a knock/ rattle type sound in motor that reminds me of the old 2.2 2.5 chysler engines(piston slap)...if anyone remembers those....
i brought it to his attention as he told me that he was told it is normal???
the company that installed it is chicago, i think i was ADP or something like that....im sure you guys know them, they did the stroker, a different turbo, piping, tuning....was a major project for them....does this sound right to anyone, any info would be helpful. i hate to see this guy spend that type of cash(it was alot) and have it grenade on him.
thanks for any help guys....
anyway here is the question......i have a customer that brought in an 05 evo mr for an a/c problem which was a quick fix, but talking to him i find out that he has a 2.3 stroker motor in car, with alot of other the things done also.....this car is no joke!
anyway, my only concern for him is that it has a knock/ rattle type sound in motor that reminds me of the old 2.2 2.5 chysler engines(piston slap)...if anyone remembers those....
i brought it to his attention as he told me that he was told it is normal???
the company that installed it is chicago, i think i was ADP or something like that....im sure you guys know them, they did the stroker, a different turbo, piping, tuning....was a major project for them....does this sound right to anyone, any info would be helpful. i hate to see this guy spend that type of cash(it was alot) and have it grenade on him.
thanks for any help guys....
#50
Evolved Member
iTrader: (4)
Join Date: Apr 2004
Location: Stafford, VA
Posts: 618
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Az3ar
hmm, I was thinking about a 2.3 stroker on my EVO in couple years. Not anytime soon because my engine is solid but I am sure it will be ton of fun with stock turbo and 2.3 engine.
What is piston slap exactly? Does it slap against something?
What is piston slap exactly? Does it slap against something?
I am getting my 2.3 stroker built at JAM right now and I would like to know what to expect. I have never heard of this before.
Originally Posted by SVTMustang Forum
Pistons get very hot with each WOT pull and need to expand, but have nowhere to expand to except into the cylinder walls which dont expand as fast or as much as the pistons, so the pistons and cylinder walls get galled or the piston breaks. The piston (aluminum) will expand quicker than the cylinder walls (iron) so it is very important to be fully warmed up before WOT occurs.
Last edited by nrcooled; Jan 30, 2006 at 12:23 PM.
#51
A piston does not magically slide up the cylinder walls. It rocks back and forth (Think pong) along the sides of the cylinder walls and if the clearances are loose, the piston will "slap" the sides of the bore until the engine is warm and the piston expands.
Originally Posted by Az3ar
hmm, I was thinking about a 2.3 stroker on my EVO in couple years. Not anytime soon because my engine is solid but I am sure it will be ton of fun with stock turbo and 2.3 engine.
What is piston slap exactly? Does it slap against something?
What is piston slap exactly? Does it slap against something?
#52
Evolved Member
iTrader: (18)
Originally Posted by 4G63>OOOO
A piston does not magically slide up the cylinder walls. It rocks back and forth (Think pong) along the sides of the cylinder walls and if the clearances are loose, the piston will "slap" the sides of the bore until the engine is warm and the piston expands.
Ya, thanks for the info. I found many info on the web last night. same thing darkhorse told me. 2.3s on EVOs are great but they have to be built very well or the results won't be pleasant. Anyways, I am not doing it anytime soon so I guess I will wait and see what we have first.
#53
Evolved Member
iTrader: (17)
Join Date: Apr 2004
Location: 41° 59' N, 87° 54' W
Posts: 6,224
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mitsitech
i just want tell everyone that had some good feed back about this question....thanks...
i did not start this tread to cause a bunch of little arguments, and certainly not to have have my credibility questioned. like i said before, i was only trying to help someone out.
i did not start this tread to cause a bunch of little arguments, and certainly not to have have my credibility questioned. like i said before, i was only trying to help someone out.
l8r)
#58
Evolved Member
iTrader: (21)
Join Date: Jan 2004
Location: MI
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Az3ar
from what I have heard and gatherd so far that Ross pistons are not the way to go. they expand too much. I dont have all the info but hope that helps.
Thread
Thread Starter
Forum
Replies
Last Post
Daitonsralliart
09+ Ralliart Engine/Turbo/Drivetrain
27
Aug 17, 2019 10:19 PM
Boostfarmer
Evo X Engine / Turbo / Drivetrain
10
Mar 25, 2016 08:51 AM
jackfrog
Evo X Tires / Wheels / Brakes / Suspension
22
Oct 2, 2015 01:21 PM