SALEVO

Hi everybody,

I am a new member at this forum, my evolution is a Evo VII RS2, with a stroke kit Tomei 2.2 + HKS 272 in/ex Cam, HKS intermanifold plus AMSGT-35R turbo kit, ECU AEM.

In this country, we don't have 4WD dyno, at this moment is working at 1.4 bar and is doing very well. But, I don't know how much HP's, with all this stuff, am I having in the Evo?

thanks a lot

Kwman

iTrader: (4)

El salvador? Probablmente, tienes 450 - 550 hp con esta 1.4 bar.

ttmanta05

iTrader: (1)

WOW!! Nice car

evo542

love the inside, btw. that turbo kit can put down around 400whp on pump gas (20psi) and on race-gas 600whp+ @30psi

gsujeff55

iTrader: (4)

um, don't think that turbo kit can run 600whp at only 30psi.

1.4 bar probably around 420whp, assuming the timing curve is right. its really hard to say.

SALEVO

Thanks for reply.
My evo was finished 8 month ago, after tuning all is working very nice I can say it is working perfect, good power and TQ. I want to say thanks to the three person to help during the project, with out them it could not been possible:
CRAZY FOR CARS- Enrique Thompson, Panama
AUTO CLINICA- Minor Guzman, Costa Rica
TUNING CONCEPTS- Justin Nenni, USA

Thanks again for all your help and suport
Best Regards
Here is my modify list:
Engine:
-Tomei 2.2 strocker kit
-HKS racing suction kit RS, Kansai carbon fiber airbox
-HKS 272 in/ex, cam gears
-HKS Kansai intake-manifold+Q45 throttle 80mm
-Jun valvetrain, Ferrea valves, Ferrea valves springs
-HKS 1.2mm head gasket, ARP head, main studs
-Perrin high flow fuel rail, HKS 1000cc injectors
-Sard fuel regulator, Walbro 255 in tank fuel pump
-Attain sugen tank+Nismo GTR 310 fuel pump
-HkS type R intercooler, HKS racing blow off
-AMS GT35R turbo kit
-Aquamist injectors, Greddy oil catch
-JIC 3" titanium exhaust
-AEM EMS
-Bosh platinum sparks, Ralliart spark cables
-HKS twin power DLI2
-Koyo radiator, FAL fan, Ralliart 1,3 radiator cap
-Ralliart oil cap, Ralliart cool thermostat
-Beatrush cooling panel

Drivetrain, Brakes, suspension:
-ATS tripple carbon clutch
-C's short shifter, Kartboy shifter bushings
-AP racing 6 calipers, AP racing 4 calipers
-Tein Flex coil cover
-Cusco front titanium bar, rear bar
-Cusco sway bars

Interior, Exterior
-AEM wideband gauge
-Defi-Link control unit2, Defi display sensor fuel press/oil press/ oil temp
-Defi meter 60mm boost/Egt/ water temp
-HKS Kansai carbon fiber hood meter
-Apex'i turbo timer
-Ac Schnitzer shift knob
-Tein EDFC unit for flex coilover
-Ralliart driver wheel
-HKS Kansai carbon fiber front spolier
-SSR GT3 18x9.5, Pirelli P-cero corsa 255/35/18
-Ganador carbon mirror
-HKS kansai rear heat shield carbon fiber
-Ralliart mudflaps

AutoMotoSports

iTrader: (42)

Nice car, I would recomend taking the Heat wrap off the header though. its really not needed and it voids the warranty on our headers.

Eric

SALEVO

Thanks, Eric

jmartinez1170

iTrader: (21)

this is one nice line up of parts jdm STYLE i like

SALEVO

here more pics.

jmartinez1170

iTrader: (21)

Man i only wish i had the money to spend on the tomie 2.2L kit that thing is sick. Ok maybe you can answer me this ? about that kit is it true you can rev this to 10 grand safely plz ive been dieing to know this ive ask this ? some many times and noone has ever told me.

SALEVO

more pics

jmartinez1170

iTrader: (21)

whats the deal can u tell me if its true or not.