Exedy Twin Disk HD Install Question
Apr 6, 2006, 03:30 PM
#1
Exedy Twin Disk HD Install Question
The directions really suck so I have a question, when installing the clutch do you disaessemble the clutch by removing the allen bolts on the pressure plate or the normal bolts that are on the back of the clutch? Directions make important note not to loose bolt B, and only loosen bolt A, well which is which?
Apr 7, 2006, 08:19 AM
#2
well if you remove the bolts from the back of the new flywheel holding the clutch assembly together, when you bolt up the flywheel, you wont have access to those bolts again.
the allen head bolts need to be removed... I believe they are 10mm allens, and the torque spec on them i believe is also 23 ft- lbs... and flywheels is 98.3 for the 17mm's and make sure you use a 6 point, i have seen people stripping them using 12 points.
cheers
cb
the allen head bolts need to be removed... I believe they are 10mm allens, and the torque spec on them i believe is also 23 ft- lbs... and flywheels is 98.3 for the 17mm's and make sure you use a 6 point, i have seen people stripping them using 12 points.
cheers
cb
Thread
Thread Starter
Forum
Replies
Last Post
asu11
Evo Engine / Turbo / Drivetrain
3
Nov 15, 2016 04:44 PM
MitsuJoe
Evo How To Requests / Questions / Tips
468
Feb 20, 2016 11:17 AM
Boost3dxEvO
Automotosports - Illinois
7
Aug 17, 2009 02:51 PM
