This is posted just for a basis sake to give everyone the heads up on the kit. It was installed on my 05 EVO 8 MR. Stock motor, tback exhaust, SBR FMIC, AFC, 850 cc inj, Aero regulator,walbro 255hp, and a SBR manual BC. The kit made 405 AWHP and 360 TQ on a Dyno Pack Dyno at 21psi on 94 oct with just an AFC II for tuning. I can post pics of the intall/dyno graphs later if needed. attached is a pic of what is included in the kit

Mark
SBR

 

very nice looking kit... which turbos do you offer for it?

 

Nice so how much is this kit going to cost?

 

This is off topic a bit but do you guys carry the stainless turbine housing by Bullseye power for the 3076R ? If so how much ?

 

we offer any garret 4 bolt outlet based T3. WE can do a cheaper std bearing turbo but our 3500.00 retail is for the GT turbos. There is another thread on here about pricing and Customer installs. This was just more of a FYI for rating of the kit. The 30r spooled 600 rpms later than the stock turbo on the dyno. If any one has any questions, email me mas@slowboyracing.com or call in to the shop 724-349-8417 ext 12

Thanks
Mark
SBR

 

Can you post the dyno sheet, also what turbo are you using to make those numbers??

 

Um thread title says 3076

 

tried looking for this other thread no luck

 

Guys I just installed my SBR gt35r kit and it is a good quality kit. I will do a right up in a few days after I get everything tuned but as far as fitment goes everything went in really easy with plenty of clearance.

 

From the last picture it looks like a 4" intake pipe with no MAF. Do you offer this with a 3" pipe for MAF cars.

I would assume so since you tuned this with a SAFC but i just wanted to check. Also, can you PM me pricing and availability info.

BTW - that is a sexy A$$ kit! Very stock looking and clean.

 

very interested in sbr gt35r kit...

pm me wif details please...

 

wouldnt mind that with a std garrett t3/t4 50 trim, what kind of cost reduction would there be? The supporting parts are really nice though

Will you be able to buy the manifold and 02 housing seperate?

manifold for internally gated possible?

 

Good stuff guys. I personally had good experience from you guys, I got a turbo upgrade for my Eclipse GSX(18 months ago) and your customer service and parts were great.

No doubt that I would recommend Slowboyracing again.

Carlos

 

price depends on turbo choice.. email me mas@slowboyracing.come and we can figure that out.. Yes O2 housing and Manifold are avaiable seperately.. mani 649.00, O2 housing 349.00

Mark
SBR

 

does a stock downpipe fit this kit?