Fresh install: Short wirte up on the Buschur 3065
#91
Newbie
iTrader: (1)
Join Date: Oct 2005
Location: Texas
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by davidbuschur
Our turbo kits will not clear some of the thicker aftermarket radiators. Sorry it too so long for one of use to answer that question.
The stock radiator has a lot of room. We use to use a Vband flange at the outlet of the turbo to the wastegate, some guys did not adjust that correctly or didn't tighten it enough and ended up with a problem. Now the outlet of the turbo to the wastegate is solid. The closest part of our kit to any radiator is the top of the wastegate. As I say, stock radiator there is quite a bit of extra room. Some thicker aftermarket radiators it is tight though.
Jarrod's car ran 11.04 at 128 mph with this turbo on C16 at 28 psi of boost. Jarrod's car is just our Stages 1-4, AEM EMS, Exedy Twin disc. Still has a bone stock head, shortblock, intake manifold and throttle body on it. Also has HKS 272 cams in it. It is not lightened at all.
The stock radiator has a lot of room. We use to use a Vband flange at the outlet of the turbo to the wastegate, some guys did not adjust that correctly or didn't tighten it enough and ended up with a problem. Now the outlet of the turbo to the wastegate is solid. The closest part of our kit to any radiator is the top of the wastegate. As I say, stock radiator there is quite a bit of extra room. Some thicker aftermarket radiators it is tight though.
Jarrod's car ran 11.04 at 128 mph with this turbo on C16 at 28 psi of boost. Jarrod's car is just our Stages 1-4, AEM EMS, Exedy Twin disc. Still has a bone stock head, shortblock, intake manifold and throttle body on it. Also has HKS 272 cams in it. It is not lightened at all.
What kind of power will this kit make on just pump gas? Also, how would you compare the spool characteristics with that of a 50 trim BB on a 2.0?
#92
Evolved Member
iTrader: (10)
Join Date: Mar 2003
Location: Southern MD
Posts: 725
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Batmann!
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx
What kind of power will this kit make on just pump gas? Also, how would you compare the spool characteristics with that of a 50 trim BB on a 2.0?
What kind of power will this kit make on just pump gas? Also, how would you compare the spool characteristics with that of a 50 trim BB on a 2.0?
#93
Evolved Member
Thread Starter
iTrader: (10)
Join Date: May 2004
Location: Milwaukee
Posts: 2,679
Likes: 0
Received 0 Likes
on
0 Posts
These numbers are on pump gas ONLY! I do not have a scanner but as soon as i can get my hands on one i'll post the sheet. I do plan on running a alky injection kit with a AEM. Switching to a AEM alone will unlock a decent amount of power even on pump. It does appear that this is a race gas turbo but it is still fun as hell with pump on the street.
I'll keep everyone updated...
I'll keep everyone updated...
#96
Evolved Member
Thread Starter
iTrader: (10)
Join Date: May 2004
Location: Milwaukee
Posts: 2,679
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dryad001
Pfft, screw race gas Ryan. I'll never run it in my car again. 2 o2 sensors down the tubes. Ill give you a call later on today. See ya friend.
Im just curious if meth injection will be able to keep up at 32 psi...you would know more about that than me at this point.
#97
Evolved Member
iTrader: (66)
Originally Posted by dryad001
Pfft, screw race gas Ryan. I'll never run it in my car again. 2 o2 sensors down the tubes. Ill give you a call later on today. See ya friend.
#100
Evolved Member
iTrader: (10)
Join Date: Mar 2003
Location: Southern MD
Posts: 725
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by davidbuschur
stinkapuss,
Very nice times. Is that with our kit? What fuel were you running?
Very nice times. Is that with our kit? What fuel were you running?
Heres my thread in the drag forum.
https://www.evolutionm.net/forums/sh...d.php?t=221485
#104
Evolved Member
Thread Starter
iTrader: (10)
Join Date: May 2004
Location: Milwaukee
Posts: 2,679
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kmcconn9
/\ just put in some 116, and crank the boost up....if the tune was done correctly it shouldnt need to be changed for the race gas map...
You could adjust the tune for even more power...but you will be safe with your current tune..
You could adjust the tune for even more power...but you will be safe with your current tune..
Thread
Thread Starter
Forum
Replies
Last Post
Jameson_IXMR
Evo How To Requests / Questions / Tips
21
Dec 11, 2016 07:33 PM
HaVoC RR
Northeast Region
10
Aug 11, 2008 11:30 AM
SIMSSEGA
Lancer Aftermarket Forced Induction Tech
57
Nov 12, 2006 08:01 PM