Twin scroll T3 manifold
#154
the t3 .82 and 1.06 housings are extremely limited. very very rare. we may start selling them in the future, but right now they are pretty rare and very pricey.
the t3 .78 housings are quite common now and we sell them very often, particularly for our sr20 customers.
the t3 .78 housings are quite common now and we sell them very often, particularly for our sr20 customers.
Hi,
is there any comparison between .78 .82 1.06 T3 TS turbine housings on GT30?
Thanks
#155
Evolved Member
iTrader: (6)
There have been very few on here to choose the t3 ts setup so results are pretty limited. It would be easier to use a ts housing is a little larger than you would use for ss.
Good job for searching, but this thread is almost 5yrs old...
These old threads remind me of old yeller except I would not cry if a mod puts them down.
Good job for searching, but this thread is almost 5yrs old...
These old threads remind me of old yeller except I would not cry if a mod puts them down.
#156
There have been very few on here to choose the t3 ts setup so results are pretty limited. It would be easier to use a ts housing is a little larger than you would use for ss.
Good job for searching, but this thread is almost 5yrs old...
These old threads remind me of old yeller except I would not cry if a mod puts them down.
Good job for searching, but this thread is almost 5yrs old...
These old threads remind me of old yeller except I would not cry if a mod puts them down.
Ok, thanks!
#157
Evolved Member
iTrader: (19)
Its my understanding that T4 is more ideal in general for twin scroll, partially because T4 offers larger sizes. Along the same lines, for a T3 TS, you'd want to go with the 1.06 for optimal results. The smaller housings haven't seemed to produce the best results compared to the larger. Another of the hurdles with TS T3 is the availability of TS T3 housings compared to T4. This could have changed since I got this information but that's what I have gathered.
Last edited by hokiruu; Dec 3, 2011 at 05:18 PM.
#158
Old thread but since the question was posed:
Its my understanding that T4 is more ideal in general for twin scroll, partially because T4 offers larger sizes. Along the same lines, for a T3 TS, you'd want to go with the 1.06 for optimal results. The smaller housings haven't seemed to produce the best results compared to the larger. Another of the hurdles with TS T3 is the availability of TS T3 housings compared to T4. This could have changed since I got this information but that's what I have gathered.
Its my understanding that T4 is more ideal in general for twin scroll, partially because T4 offers larger sizes. Along the same lines, for a T3 TS, you'd want to go with the 1.06 for optimal results. The smaller housings haven't seemed to produce the best results compared to the larger. Another of the hurdles with TS T3 is the availability of TS T3 housings compared to T4. This could have changed since I got this information but that's what I have gathered.
Ok thanks
Thread
Thread Starter
Forum
Replies
Last Post
EvoDan2004
Project Cars / Build Threads
1248
May 10, 2016 06:14 PM
XSilverJ
Evo Engine / Turbo / Drivetrain
80
Jan 30, 2016 07:37 AM
maperformance
EvoX 'For Sale' External Engine / Power
40
Sep 11, 2015 12:56 PM