What is the most power anybody on here has made out of a 3076R? I just got race gas tuned today and Doug from TopSpeed was rather impressed with the digits for the snail....... 490/480

Btw, if your in the GA/SC/FL area and want to go somewhere where you want to be able to both trust and enjoy your tuning experience go to TopSpeed, Doug knows his stuff.

Scorke

Dyno Below...



Whats up Joe?

 

meth or race gas? psi?

 

Racegas, 30 tapering to 26.

Scorke

 

Where is the graph? I'll have to go over and talk to Doug on Tues. They perform all my tuning.

 

The graph doesnt exist, I just made this all up, Doug will attest that my car actually made 370 whp, but I will try to sell my kit for hundreds of dollars over what I paid for it.






Sorry smokinjoe, but because of your shadyness I had to play with ya. The graph will be up tomorrow if Doug/Tray are in, he (Doug) had to drive a customer to the airport because he never got to finish up his STI, it was breaking up/having issues and needed to be tuned however Doug and the TopSpeed crew felt the customer was better off leaving his car with them till they found out what was wrong(he just built his motor and lost close to 60 whp on c16!!!!)

Graph/Graphs will be up tomorrow, basically it looks like the tq'iest GT series turbo plot you have ever seen.

Scorke

 

p.s. SmokinJoe, your car would make another 120 whp and 100+ ft lbs of tq on c16 then what it does now on 109 if you were running a similar kit, what did your car make on pump, mine made 385/360, 400/400 on 22 psi and C16.

Scorke

 

Very impressive numbers scorke! Once I got my AMS 3076 dialed in I never made it back to the dyno. Intial base mapping it put down 420whp/380tq on pump w/ about 22psi.

What "kit", if any are you using?

 

To call it a "kit" would be an understatement haha, it seems somehow during my time of being bit buy the evo bug I got infected by the DSM one and my car is a hodgepodge of parts, that happen to work. It's Vishnu's V550Race kit, which is there "Stage 3" which is a Garret 3076 bolted to there own tubular manifold, and a Tial 38mm gate. The intake and LICP were both custom Fabbed by TTRix, I am running 780cc injectors, my own stroker "kit", Buschur Deluxe FMIC, RNR Catback, Walboro 255, HKS 272's, Ecutek'd ecu and I think thats about it for things that would help you try to figure out my setup. If you have any other questions post up/PM me, anything you need to know I will help out.

Btw, just for clarification, I have a stock intake mani, stock head(minus cams and studs), stock maf....

Scorke

 

those r some strong #'s scorke. must be the 2.3L. most 2.0's i think r in the 400-425 range with that turbo...

 

Yup it is a 2.3, to be honest the 2.3's make equal or sometimes lesser hp(on monster turbos the extra rev potential of a 2.0 starts to shine) however the TQ is the truely impressive part. I am anxious to get a graph up for you guys, it really is a killer street/strip/roadcourse setup. Glad you like it!!!!!!!!!

Scorke

 

i'm a fan of displacement. down in Mesa AZ, my buddy's shop has an EVO8 with a 2.4L 4G64 motor. withthe old setup (GT35R)that car would lift u out the seat & rev all the way to 8K!!!!! the new setup being built is with an HKS T04Z...

 

^ Doug rev's mine to 8300!!!!!!!!!!!!!!!!!!!!!! On the street I keep it below 7-7500, its so nice knowing that when your ragging on your car you still have anothe 1k+ of rev range to go if you want, yet after you shift your already sitting in an RPM range that is well past what you need for peak boost..........

Scorke

 

I agree with his statement about Topspeed. I had my car tuned there and I was very impressed. I had a road tune from a previous tuner and there is no comparison. With a boost leak secondary to my stock WGA, My car put down 380whp and 385tq. on stock turbo and of course a ton of other mods.

+1 for Doug!!!

 

Very nice man .....Just curious...why didnt you get the 3065?....I hear that this turbo would be great for the street also....how did you make up your mind...see..i have this dellima now...3076r vs 3065...with a stroker both make nice numbers....Also any plans for Alky?

But again your numbers are NICE ...i hope that ill get there soon

 

I dont think this thread is about Joe's sponsors. Why dont you PM him ??

Nice numbers SCORKE.

Can you have a Cam in BSP? (PM ME)