HKS DLI 2 vs Sun Hyperforce Ignition
#16
Sun Auto Hyperforce System works great for me and some customers.
Here is a before and after dyno results.
All results were tested on the same day and same vehicle owned by our local member here.
Vehicle is 2006 EVO IX w/ just tanabe downpipe and hks cat-back.
Before
After
Here is a before and after dyno results.
All results were tested on the same day and same vehicle owned by our local member here.
Vehicle is 2006 EVO IX w/ just tanabe downpipe and hks cat-back.
Before
After
it seems that the Sun unit strengthens the spark and as the rpm raises and more mixture is going in the engine the combustion is better thus giving more consistent power... This is how i understand it...
...and i guess at higher boost levels consistency becomes even higher...
Thats very interesting!
Any units in stock?
#18
I have had it for about 3 weeks now and its doing great. I used to miss spark at or around 26psi+ with 93 oct. now with the Sun Auto I have had a constant 28psi with no issues. I run no meth, but do put in about 25% 114oct... anyway, you have a believer here. I like it.. plus I have the other two Sun products(ground,voltage) to complement the whole package.
#20
I'm running the HKS which is working fine for me up to 34psi but i did have the harness crap out on me about a year ago! Ordered a new one and havent had any more troubles as yet. Seems like one of the little circuit boards in the harness went bad for some reason.
#23
sounds awsome. if you have COP do that too. this can be a very cool test here. thanks for taking it on.
and why do i see soooooo many people having problems with the hks dli?? does hks know this is happening? what do they say??
and why do i see soooooo many people having problems with the hks dli?? does hks know this is happening? what do they say??
#24
Waiting for soneone to get one of Ultra MDI units: http://www.nagaidenshi.co.jp/IGNITION/mdi_9652-01.shtml
#25
i have mine mounted on our battery tray with rubber grommets, instead of solid mounting it to the chassis.
ill take a pic when the car is back from the bodyshop.
ill see if i can test this next week for you guys.
what do u want to see? AFR/boost/hp/tq?
cb
#26
make sure you guys mount the hks unit with a rubber grommet.
i have mine mounted on our battery tray with rubber grommets, instead of solid mounting it to the chassis.
ill take a pic when the car is back from the bodyshop.
ill see if i can test this next week for you guys.
what do u want to see? AFR/boost/hp/tq?
cb
i have mine mounted on our battery tray with rubber grommets, instead of solid mounting it to the chassis.
ill take a pic when the car is back from the bodyshop.
ill see if i can test this next week for you guys.
what do u want to see? AFR/boost/hp/tq?
cb
P.S. I PM'd you yesterday did you get it?
#27
#28
but i havent noticed any improvement with the sun kit.
ill take it off, dyno, plug it right back in, dyno, then swap the hks in
cb
#29
we need someone to test aem, hks, sun, COP. that would be perfect.
#30
Waiting for soneone to get one of Ultra MDI units: http://www.nagaidenshi.co.jp/IGNITION/mdi_9652-01.shtml