!!! Intercooler Piping Pictures!!!
#20
Evolved Member
iTrader: (37)
Join Date: Sep 2003
Location: Spec-Ops Motorsports, Fayetteville, NC
Posts: 3,146
Likes: 0
Received 2 Likes
on
2 Posts
the one you are referring to is half of an upper pipe. it connects to the throttle body and then to the lower half of the upper pipe... its fairly large, about 3" i think, and is a very very tight fit against the battery. i personally would not suggest it as it really does not give you any performance gains and is just an expensive way to give your engine some dress up.
#21
Registered User
iTrader: (17)
helix I/C upper
I have my old Helix pipes that I took out that allows you to use stock battery and intake. Like mentioned before its a REAL tight fit with the stock battery...theres no play. If you wanna keep you stock parts in then I would recommend Helix...plus a some other brand which I can't remember off the top of my head...very few fit with stock.
#23
Evolved Member
iTrader: (48)
So most of these setup you need to use a mini battery and kit?? They all look good, but sucks about the mini battery part. Don't wanna run that during winters here.
I have Injen and it's pretty good. Stock battery too. My friend fabricated a licp for me and I think it was the one that made the most difference.
I have Injen and it's pretty good. Stock battery too. My friend fabricated a licp for me and I think it was the one that made the most difference.
#25
Evolving Member
iTrader: (7)
I have a HPF full IC kit and its great. I don't see what is so complicated or could be improved upon when making IC piping that would make it stand out so much from others. Just choose a kit that utilizes a slim battery kit if you are going to bother doing it at all. Only advantages I could see would be aluminum piping vs steel.
#29
Evolved Member
iTrader: (1)
Try Dejon Tool's website if you want to keep the stock battery and airbox.
Here are pics of mine with Dejon Tool 2.75in upper ic with Tial bov and Dejon 4in intake pipe.
http://rides.webshots.com/album/555517809tMPYlk
Here are pics of mine with Dejon Tool 2.75in upper ic with Tial bov and Dejon 4in intake pipe.
http://rides.webshots.com/album/555517809tMPYlk