Buschur 3065 turbo makes 473whp
#46
Account Disabled
iTrader: (91)
Join Date: Sep 2003
Location: 2003 Evo VIII - Silver
Posts: 16,850
Likes: 0
Received 0 Likes
on
0 Posts
Al... cant wait to see what numbers my you make with the same turbo, Cosworth head, built interntals and a little more boost on C16!
BTW my car is the black one with the big wing
should be tuned soon...
also... is it true that the Dyno Dynamics dyno reads about 12% lower than lets say a Dyno Jet? If so... man those are great #'s.
-Kyle
BTW my car is the black one with the big wing
![Smilie](https://www.evolutionm.net/forums/images/smilies/smile.gif)
also... is it true that the Dyno Dynamics dyno reads about 12% lower than lets say a Dyno Jet? If so... man those are great #'s.
-Kyle
Keep in mind our dyno dynamics is corrected to be on a level playiong field with dyno jet so those are very close to a dyno jet figure
Al
#47
Account Disabled
iTrader: (91)
Join Date: Sep 2003
Location: 2003 Evo VIII - Silver
Posts: 16,850
Likes: 0
Received 0 Likes
on
0 Posts
Most of them, I could not figure out how to use them or post videos
Finally, I seem to have gotten the hang of it and I am trying to share some of the experiences I have as a tuner with the community
There is a lot of interesting stuff that goes on at our shop on a daily basis and I enjoy sharing it with you guys
AL
#50
Evolved Member
iTrader: (7)
Join Date: May 2005
Location: Southern, Ohio
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
I have had a series of cameras over the last few years
Most of them, I could not figure out how to use them or post videos
Finally, I seem to have gotten the hang of it and I am trying to share some of the experiences I have as a tuner with the community
There is a lot of interesting stuff that goes on at our shop on a daily basis and I enjoy sharing it with you guys
AL
Most of them, I could not figure out how to use them or post videos
Finally, I seem to have gotten the hang of it and I am trying to share some of the experiences I have as a tuner with the community
There is a lot of interesting stuff that goes on at our shop on a daily basis and I enjoy sharing it with you guys
AL
Great numbers and the videos are definitely very informative.
#56
Evolving Member
Thread Starter
iTrader: (5)
Join Date: Dec 2005
Location: Connecticut
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Al... cant wait to see what numbers my you make with the same turbo, Cosworth head, built interntals and a little more boost on C16!
BTW my car is the black one with the big wing
should be tuned soon...
also... is it true that the Dyno Dynamics dyno reads about 12% lower than lets say a Dyno Jet? If so... man those are great #'s.
-Kyle
BTW my car is the black one with the big wing
![Smilie](https://www.evolutionm.net/forums/images/smilies/smile.gif)
also... is it true that the Dyno Dynamics dyno reads about 12% lower than lets say a Dyno Jet? If so... man those are great #'s.
-Kyle
You'll EASILY be over 500 with your setup and C16 on this same turbo.
#58
Evolving Member
Thread Starter
iTrader: (5)
Join Date: Dec 2005
Location: Connecticut
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Really, the difference of 13-14 whp at those levels is about 2% difference, not really noticable.
#60
Evolving Member
Thread Starter
iTrader: (5)
Join Date: Dec 2005
Location: Connecticut
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Cosworth were immediately available, I couldn't keep waiting for GSC to get in a new batch. Plus, Al was making consistently good numbers with the Cosworth cams, and No Limit Motorsports had amazing prices on the Cosworth cams.