11.5lb Mini Battery for $60
#37
Evolving Member
Thread Starter
iTrader: (10)
Join Date: Apr 2005
Location: Home
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Go to your local hardware store and get the posts that look like this:
Take a drill and drill a hole through the top into the bottom. Buy some 1.5-2 inch screws that will go through the post to the battery and screw it in place. Instant $4 fix.
When u get the battery it comes with two little gold screw tops. Take one and go to the auto parts store with it so you can match up the screw that would fit. THis is to make it easy so you dont' have to drag the whoel battery with you.
Good LUck!
#38
Evolved Member
iTrader: (28)
Join Date: Jun 2003
Location: York, PA 17404
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
Odyssey Batteries - Battery Terminals for PC680 (Pair)
http://store.summitracing.com/partde...=ody-3217-0006
#42
Evolving Member
iTrader: (21)
Join Date: Aug 2003
Location: Cape Cod, MA
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Use some of the money you saved and buy the nice brass terminals..That's what I did.
If you really are cheap, you can use brass plumbing plugs 3/8" and 1/2" and drill them out while you are waiting for the real ones to come...I did and then replaced these with the normal terminals.
If you really are cheap, you can use brass plumbing plugs 3/8" and 1/2" and drill them out while you are waiting for the real ones to come...I did and then replaced these with the normal terminals.
#44
Evolving Member
iTrader: (1)
Join Date: Mar 2005
Location: Las Vegas Nevada
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
Man here I just bought some injen piping to go around the stock battery. Oh well great find and info. Those mini battery kits are a little steep for most. But they sure are purty.