Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

CANT GET MY STOCK TURBO TO GO PAST 12.1 in 1/4 mile

Thread Tools
 
Search this Thread
 
Old Apr 18, 2007, 02:07 PM
  #1  
Evolving Member
Thread Starter
iTrader: (2)
 
HKSevolutionNYC's Avatar
 
Join Date: Jul 2006
Location: New York
Posts: 138
Likes: 0
Received 1 Like on 1 Post
CANT GET MY STOCK TURBO TO GO PAST 12.1 in 1/4 mile

ok here is my problem, ive seen alot of people wit stock turbos hitting high 11s in the 1/4 mile. i run 12.1 at 112 MPH race after race non stop, but cant get 11s.

here is my setup

STOCK BOTTOM END, STOCK TURBO , STOCK ACTUATOR
Buddy Club Cams 264/272
ARP Studs
Ebay o2 housing
Full 3" TBE
ARC Intake
SMC Alky Injection
Turbo XS MBC...SUCKS
Turbo XS Intercooler
Lower Intercooler Pipe
Upper intercooler pipe w/ HKS BOV
ACT HD Clutch/Pressure Plate
Tuned by sean ivey

i run 30 psi but its immediatly drops off and does like 22 psi. why is this???

anyone that runs 11s please tell me what boost controller are you using? and also do you guys upgrade your wastegate actuator? please any input will help, i just want to hit high 11s.

Last edited by HKSevolutionNYC; Apr 18, 2007 at 02:20 PM.
Old Apr 18, 2007, 02:10 PM
  #2  
Evolved Member
iTrader: (40)
 
superflyevo's Avatar
 
Join Date: Jun 2005
Location: N/E ohio
Posts: 970
Likes: 0
Received 0 Likes on 0 Posts
try some t-bolt clamps and a buschur ic
what are your 60 foot times
i got a 12 flat with less mods
Old Apr 18, 2007, 02:11 PM
  #3  
Evolving Member
iTrader: (9)
 
fastrob691's Avatar
 
Join Date: Feb 2006
Location: willcox, az
Posts: 444
Likes: 0
Received 0 Likes on 0 Posts
post a time slip so some of the drag race gurus can chime in on shifting,etc, also whats the weather/altitude?
Old Apr 18, 2007, 02:12 PM
  #4  
Evolved Member
iTrader: (2)
 
DontRevMe's Avatar
 
Join Date: Mar 2003
Location: Modesto,ca
Posts: 542
Likes: 0
Received 0 Likes on 0 Posts
whats your 60 ft

do you have a clutch?
dyno numbers?..
Old Apr 18, 2007, 02:17 PM
  #5  
Former Sponsor
iTrader: (133)
 
MitsuJoe's Avatar
 
Join Date: Dec 2003
Location: Anywhere
Posts: 3,123
Likes: 0
Received 0 Likes on 0 Posts
Well your MPH is about right for your time.

Have you dynoed it?
Old Apr 18, 2007, 02:19 PM
  #6  
Evolving Member
Thread Starter
iTrader: (2)
 
HKSevolutionNYC's Avatar
 
Join Date: Jul 2006
Location: New York
Posts: 138
Likes: 0
Received 1 Like on 1 Post
Originally Posted by superflyevo
try some t-bolt clamps and a buschur ic
what are your 60 foot times
i got a 12 flat with less mods
sorry forgot to add i have a turbo xs intercooler, also i do have t-bolts, and my 60 foots are 1.7
Old Apr 18, 2007, 02:21 PM
  #7  
Evolving Member
Thread Starter
iTrader: (2)
 
HKSevolutionNYC's Avatar
 
Join Date: Jul 2006
Location: New York
Posts: 138
Likes: 0
Received 1 Like on 1 Post
Originally Posted by DontRevMe
whats your 60 ft

do you have a clutch?
dyno numbers?..
yea i have the ACT HD clutch/PP and i put out 402 HP and 429 TQ but still the boost peaks and holds only like 22 psi, the car pulls out of the hole like an animal and i shift it perfect but hte boost doenst hold for some reason. n there is no leaks either.
Old Apr 18, 2007, 02:21 PM
  #8  
Evolved Member
iTrader: (10)
 
Kee1pride's Avatar
 
Join Date: Feb 2005
Location: Houston,tx
Posts: 1,913
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by HKSevolutionNYC
ok here is my problem, ive seen alot of people wit stock turbos hitting high 11s in the 1/4 mile. i run 12.1 at 112 MPH race after race non stop, but cant get 11s.

here is my setup

STOCK BOTTOM END, STOCK TURBO , STOCK ACTUATOR
Buddy Club Cams 264/272 - you wantedlow end power. should have gotten some 280s if you wanted top end get you going faster.
ARP Studs
Ebay o2 housing
Full 3" TBE
ARC Intake
SMC Alky Injection
Turbo XS MBC...SUCKS
Lower Intercooler Pipe
Upper intercooler pipe w/ HKS BOV - doesn't hold boost. get FORGE.
Tuned by sean ivey

i run 30 psi but its immediatly drops off and does like 22 psi. why is this???

anyone that runs 11s please tell me what boost controller are you using? and also do you guys upgrade your wastegate actuator? please any input will help, i just want to hit high 11s.
my recomendation is toss that bov and get a FORGE. you can buy cams with more top end as well. hks 280s. gsc 280s. gsc s1's, etc. you can also have your manifold ported and coated by buschur.

im right around the same time with my jestr custom tune on 24 psi and pump alone, with bad MR gearing.

sean ivey is a good tuner though. probably just your mods that are hurting you.
Old Apr 18, 2007, 02:23 PM
  #9  
Evolved Member
iTrader: (10)
 
Kee1pride's Avatar
 
Join Date: Feb 2005
Location: Houston,tx
Posts: 1,913
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by HKSevolutionNYC
yea i have the ACT HD clutch/PP and i put out 402 HP and 429 TQ but still the boost peaks and holds only like 22 psi, the car pulls out of the hole like an animal and i shift it perfect but hte boost doenst hold for some reason. n there is no leaks either.
get a better waste gate actuator that is meant to hold that much boost. stock one will drop significantly trying to hold 30 psi.
Old Apr 18, 2007, 02:23 PM
  #10  
Evolved Member
iTrader: (2)
 
DontRevMe's Avatar
 
Join Date: Mar 2003
Location: Modesto,ca
Posts: 542
Likes: 0
Received 0 Likes on 0 Posts
i would expect a higher trap with the mods you have. do you have a dyno sheet you can post?

Last edited by DontRevMe; Apr 18, 2007 at 02:28 PM.
Old Apr 18, 2007, 02:28 PM
  #11  
Evolved Member
iTrader: (8)
 
DRFTKNGG's Avatar
 
Join Date: Aug 2004
Location: FLORIDA
Posts: 1,073
Likes: 0
Received 0 Likes on 0 Posts
A 50-75hp shot will get you into the 11's. 118-128 traps.
Old Apr 18, 2007, 02:29 PM
  #12  
Evolved Member
iTrader: (2)
 
DontRevMe's Avatar
 
Join Date: Mar 2003
Location: Modesto,ca
Posts: 542
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Kee1pride
get a better waste gate actuator that is meant to hold that much boost. stock one will drop significantly trying to hold 30 psi.

the stock turbo wont hold 30 reguardless
Old Apr 18, 2007, 02:29 PM
  #13  
Evolved Member
iTrader: (8)
 
DRFTKNGG's Avatar
 
Join Date: Aug 2004
Location: FLORIDA
Posts: 1,073
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by HKSevolutionNYC
ok here is my problem, ive seen alot of people wit stock turbos hitting high 11s in the 1/4 mile. i run 12.1 at 112 MPH race after race non stop, but cant get 11s.

here is my setup

STOCK BOTTOM END, STOCK TURBO , STOCK ACTUATOR
Buddy Club Cams 264/272
ARP Studs
Ebay o2 housing
Full 3" TBE
ARC Intake
SMC Alky Injection
Turbo XS MBC...SUCKS
Turbo XS Intercooler
Lower Intercooler Pipe
Upper intercooler pipe w/ HKS BOV
ACT HD Clutch/Pressure Plate
Tuned by sean ivey

i run 30 psi but its immediatly drops off and does like 22 psi. why is this???

anyone that runs 11s please tell me what boost controller are you using? and also do you guys upgrade your wastegate actuator? please any input will help, i just want to hit high 11s.


A FORGE turbo actuator will get rid of the boost taper.
Old Apr 18, 2007, 02:30 PM
  #14  
Evolved Member
 
bluebyu36's Avatar
 
Join Date: Mar 2006
Location: new york
Posts: 2,669
Likes: 0
Received 0 Likes on 0 Posts
what plugs do you have?what are they gaped at?
Old Apr 18, 2007, 02:31 PM
  #15  
Evolved Member
iTrader: (8)
 
DRFTKNGG's Avatar
 
Join Date: Aug 2004
Location: FLORIDA
Posts: 1,073
Likes: 0
Received 0 Likes on 0 Posts
Here you go.....

https://www.evolutionm.net/forums/sh...d.php?t=264896


Quick Reply: CANT GET MY STOCK TURBO TO GO PAST 12.1 in 1/4 mile



All times are GMT -7. The time now is 03:16 AM.