Aby@MIL.SPEC

iTrader: (161)

Does anyone know the amount of piston pin offset the mahle piston applies, if any, to their pistons for the evo 2.0 or 2.3 piston line?

weisco has a 1mm pin offset.

i never measured the oem piston pin offset.

cp pistons are centered, unless you get a custom piston made.

94AWDcoupe

iTrader: (125)

they are centered

Aby@MIL.SPEC

iTrader: (161)

^ that bites...... i was kinda looking for the lighter piston/pin combo.....

are you running te mahle's in your evo? if so, what did you set your ptw clearancee to & is there much piston slap / noise @ idle? hi-rev's aggrivating the knock sensor?

94AWDcoupe

iTrader: (125)

I have run then at .004. After 5000 I got a look at pistons. They can be set tighter. I would recommend .035 with torque plate, and .004 without. They make no noise, thats why I chose them