Extreme Turbo Systems - ANOTHER Sick EVO Turbo Kit!
#37
You'd sleep far better with this kit on your EVO sitting at your house
I think our name is pretty blingy...but maybe it'd be better if it stood for Every Time Stuntin' or something similar
It is a 3.5" downpipe. Our experience has been that about 900whp is where 3.5" exhaust becomes a restriction. At that point you'd be looking at either dumping out of the downpipe or getting a custom 4" downpipe-back system built to retain an exhaust. We can help you reach a solution either way
We have done the 3" piping kits so that's no problem. Our intercoolers are available in either 4" or 5" thicknesses. I'm certain we'll be able to work out a package for you that will kick some serious ***...when you're ready sir
We'll be getting those items finished soon! I should say, as soon as we have a second away from production for orders Winter time is typically a little less busy so we should have it released in the next couple of months.
The T3 housings are available in either .48 or .63 sizes. We use the .63 for better top end flow on a turbo that already spools very quickly. If you are looking to go bigger, T4 and larger wheels is always an option!
Tom
Is this offered with a 3.5 DP? Or is it a 4 DP? I think with the 74MM wheel, to get the most power from it you are pretty much going to have to go with a 4 inch TBE, would i be correct in assuming that? Would a 4 inch down pipe fit? Love the look and performance of your guys kits. Sorry for all the questions, Im just in the market for a kit here soon and i think i found who im going through. Im going to need a Full 3 inch hard pipe kit and a 4.5 inch or 5 inch intercooler..so maybe we can work something out
It is a 3.5" downpipe. Our experience has been that about 900whp is where 3.5" exhaust becomes a restriction. At that point you'd be looking at either dumping out of the downpipe or getting a custom 4" downpipe-back system built to retain an exhaust. We can help you reach a solution either way
We have done the 3" piping kits so that's no problem. Our intercoolers are available in either 4" or 5" thicknesses. I'm certain we'll be able to work out a package for you that will kick some serious ***...when you're ready sir
The T3 housings are available in either .48 or .63 sizes. We use the .63 for better top end flow on a turbo that already spools very quickly. If you are looking to go bigger, T4 and larger wheels is always an option!
Tom
#41
Tom
Thread
Thread Starter
Forum
Replies
Last Post
ETS Michael
ExtremeTurboSystems.com – WA
2
Dec 23, 2009 10:44 PM
ETS Michael
ExtremeTurboSystems.com – WA
67
Sep 9, 2009 05:06 PM
ETS Michael
ExtremeTurboSystems.com – WA
16
Mar 27, 2009 09:12 AM
ETS Michael
Evo 'For Sale' External Engine / Power
73
Feb 1, 2008 02:06 PM
ETS Michael
ExtremeTurboSystems.com – WA
36
Aug 29, 2007 04:56 PM