RNR Turbo Kit made POWER with a DynoFlash tune!!
Oct 18, 2007, 11:22 PM
#31
Just got retuned for my RNR kit that was bought new before all the bad hype with RNR. I finally installed it 2 years later! I bought it without a turbo, so i sourced my own Precision 6031RE ball bearing turbo. Al from DynoFlash did an awesome job tuning the car for both street and race boost. Here are the results...
21 PSI on 93 pump gas
29 PSI with C-16
21 PSI on 93 pump gas
29 PSI with C-16
Oct 19, 2007, 05:48 AM
#32
Evolved Member
iTrader: (9)
Join Date: Jan 2005
Location: Albany, NY
Posts: 3,139
Likes: 0
Received 0 Likes
on
0 Posts
this is close to my power. i made 472whp 426tq with 1.7 bar, 93octane and 100% meth on the same dyno. George was thinking i would make close to 550whp with 30+psi and c16.
and no one said the RNR kits didnt make power, it was the owner who was stealing peoples money then disapeared.
Oct 19, 2007, 09:25 AM
#34
Evolved Member
Thread Starter
iTrader: (35)
Join Date: Sep 2004
Location: Near the hOle
Posts: 1,499
Likes: 0
Received 0 Likes
on
0 Posts
the first graph, the numbers are not the same on both sides, where as the second graph they are.
this is close to my power. i made 472whp 426tq with 1.7 bar, 93octane and 100% meth on the same dyno. George was thinking i would make close to 550whp with 30+psi and c16.
and no one said the RNR kits didnt make power, it was the owner who was stealing peoples money then disapeared.
this is close to my power. i made 472whp 426tq with 1.7 bar, 93octane and 100% meth on the same dyno. George was thinking i would make close to 550whp with 30+psi and c16.
and no one said the RNR kits didnt make power, it was the owner who was stealing peoples money then disapeared.
.
Oct 19, 2007, 11:13 AM
#39
Evolved Member
iTrader: (42)
Join Date: Aug 2005
Location: St. Charles, IL
Posts: 2,502
Likes: 0
Received 0 Likes
on
0 Posts
Oct 20, 2007, 12:43 AM
#45
Do you have a way to log boost, I would love to see what you get full boost by, according to the graph peak torque comes on pretty fast so I am sure you may get full boost by about 3800 - 4000 some where. The reason I love this turbo is because it seems to hit peak torque as fast as a 3076 on a 2.0 maybe faster, but it is rated at 580 flywheel hp vs 500 on the 3076 and its also cheaper
Last edited by mchuang; Oct 20, 2007 at 12:46 AM.