We just finished a build on my car about a week ago and while i was driving home last night and the car turned off... No spark


We checked all the fuses... swapped spark plugs and coil packs, didnt work....

Something electrical is acting up and its beyond me....


HELP!


Cheers!

 

Bad ground? Will the car even turn over?

 

cars is turning over... so were 99% sure its no mechanical....


We have a dli plugged up as well and the dli is turning on so its seeing power...


we tested the coil pack by pulling it and sticking a plug in it then grounding it.... we tested on a friends car and it worked, not working on mine...

 

Are you throwing any codes, like the crank angle position sensor or camshaft position sensor?

 

If you arent any codes, you've tested continuity to the coils and the coils themselves, it's the DLI.

You might find THIS useful

 

I once installed the crank position sensor wrong and it wouldn't start but I got a brake light too for some reason

 

we thought that might be a possibility.... Im going to take it to the dealer on monday since its electrical they should be able to pinpoint it pretty fast...

 

if the dealer cant figure it out ill guarantee we can,, i have a spare for every single electrical part..

 

pmed you with a cell so we can work something out... I rather take it to you but i didnt think you would want to deal with petty bull****

I know Cwill knows his ****, 10x more than the dealer so that will put me at ease

 

hows it coming?? figured anything out?? could be (as mentioned) a bad ground.

 

we checked everything we could... cant find a problem to fix it...

 

are you getting fuel to the motor??

 

check you ECU ground my car did this once to and the ECU ground had came loose just a suggestion hope it works out for ya man

 

Try bypassing the DLI. They are notorious for having issues. I believe the harness itself is what goes bad. Unplug the DLI harness from the coil packs and factory harness and then plug the factory harness on the coils and see if you get it fired.

 

have you tried bypassing the DLI2? It's easy and will at least rule it out.