Which Internals!!!!
#47
Evolved Member
iTrader: (21)
Join Date: Jun 2005
Location: chicago
Posts: 2,997
Likes: 0
Received 0 Likes
on
0 Posts
I think we said it all there isnt much more. There isnt 30 options here its about as dry cut as its going to get.
You do the work yourself or you pay someone to do. You do a drop in or you pull the block to get it bored .20 over. Last option you buy a block and call it a day. Either way you do it. It will cost you a arm and a leg for shipping.
#49
Evolving Member
Join Date: May 2005
Location: Türkey/İstanbul
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
If ı were you ı dont want to use crower.I dont say crower rod is bad but you can find better rod's on the market.For example carillo h beam.Je piston and carillo is one of the best combo or you can buy complete stroker from Tomei.Tomei is the Best.
#52
Evolved Member
iTrader: (21)
Join Date: Jun 2005
Location: chicago
Posts: 2,997
Likes: 0
Received 0 Likes
on
0 Posts
But if you can get a 2.2L go for it. I have seen first hand the jun kit with a reg. 35R kit and it really moved even on pump gas it laid down a good 510whp. Then at the same time you dont have to get the jun there are cheaper kits out for a 2.2L it all depends on how much you want to spend.
Last edited by jmartinez1170; Dec 13, 2007 at 11:02 AM.