Tre Rear Differential Upgrade Service
#271
Evolved Member
iTrader: (22)
Join Date: Nov 2004
Location: CT
Posts: 1,427
Likes: 0
Received 0 Likes
on
0 Posts
Actually the rear diff bushings are all quite easy to cut out. You basically slide a hacksaw blade (or coping saw if you prefer) through the bushing, then reconnect to the saw handle. Then cut through the outer bushing sleeve. Once you have cut the outer sleeve it is VERY easy to hammer out the old bushing with a screwdriver and hammer. The poly replacements are typically 2 pcs and are pressed in from the outside. You'll need a vice at best.
#272
EvoM Guru
iTrader: (41)
Actually the rear diff bushings are all quite easy to cut out. You basically slide a hacksaw blade (or coping saw if you prefer) through the bushing, then reconnect to the saw handle. Then cut through the outer bushing sleeve. Once you have cut the outer sleeve it is VERY easy to hammer out the old bushing with a screwdriver and hammer. The poly replacements are typically 2 pcs and are pressed in from the outside. You'll need a vice at best.
#273
Evolved Member
iTrader: (19)
Join Date: Oct 2004
Location: CT
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
Actually the rear diff bushings are all quite easy to cut out. You basically slide a hacksaw blade (or coping saw if you prefer) through the bushing, then reconnect to the saw handle. Then cut through the outer bushing sleeve. Once you have cut the outer sleeve it is VERY easy to hammer out the old bushing with a screwdriver and hammer. The poly replacements are typically 2 pcs and are pressed in from the outside. You'll need a vice at best.
Didn't think of this approach. Good idea.
If you can't get access to a press this sounds like the way to go. I was referring to bushings other than just the diff ones (lateral arms, mustache bar, etc.).
For those who want to do a lot of bushings Harbor Freight has some pretty cheap presses.
Last edited by chmodlf; Oct 17, 2008 at 08:16 AM.
#274
Evolved Member
iTrader: (22)
Join Date: Nov 2004
Location: CT
Posts: 1,427
Likes: 0
Received 0 Likes
on
0 Posts
Didn't think of this approach. Good idea.
If you can't get access to a press this sounds like the way to go. I was referring to bushings other than just the diff ones (lateral arms, mustache bar, etc.).
For those who want to do a lot of bushings Harbor Freight has some pretty cheap presses.
If you can't get access to a press this sounds like the way to go. I was referring to bushings other than just the diff ones (lateral arms, mustache bar, etc.).
For those who want to do a lot of bushings Harbor Freight has some pretty cheap presses.
#275
I'm interested in doing the diff upgrade but live in the Middle East so the shipping would be killer due to the weight even, and then there's the downtime issue.
Wondering if the TRE exchange option would still apply in my case? Would love to find a way to make it work!
Wondering if the TRE exchange option would still apply in my case? Would love to find a way to make it work!
#277
If I were you Id just purchase one off of Ebay or something and have it sent straight to Jon@TRE. Then he can just send it straight to you when done and you will have zero downtime and save on shipping. And it would be nice to have a spare sitting in the garage just in case.
Marty
Marty
#279
It worked for me when I purchased a transmission Just make sure you check his seller ratings and open up a good dialogue with the seller to help ensure you dont get ripped off.
Marty
#282
Evolving Member
iTrader: (1)
Join Date: Jan 2004
Location: Lex, KY
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
I have been wondering if there are any longevity problems with this upgrade. My car is a DD first, autoxer second, and anything else is a long third. Has anyone that has done this ran into any noises, weird driving, or accelerated wear with this mod?
#283
Evolved Member
iTrader: (18)
I had mine put on April 2008. No problems whatsoever. I noticed some noises when I first started driving it (especially when taking a tight turn out of a parking spot at slow speeds), but I'd also replaced the rear diff bushings with Whiteline bushings. After the diff broke in the noises went away.
#284
Newbie
iTrader: (11)
Join Date: Jan 2009
Location: USA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
The TRE rear diff mod seems like a must, so, I am looking for an OEM rear diff so I don't have any down time since my Evo is my daily driver. Anyone on this post have one they want to sell to me? It seems TRE doesn't have any 06 rear diff's in stock to exchange at the moment.